Hyundai 98110-0W000 Windshield Wiper Motor Assembly

1. Remove the wiper arm mounting nuts. 2. Mark the position of each wiper arm to its shaft, then remove the arms. 3. Remove the plastic cowl cover. 4. Disconnect the electrical connector from the wiper motor. 5. Remove the wiper motor and link assembly mounting bolts and lift the entire unit out of the cowl. 6. Pry the linkage rod from the crank arm pivot of the wiper motor. 7. Remove the crank arm nut, mark the relationship of the crank arm to the motor shaft, and remove the crank arm. 8. Remove the wiper motor mounting bolts and separate the motor from the link rod assembly. 9. Installation is the reverse of removal.