How to remove and install bumpers on Hyundai Accent?

For models from 1986 through 1989, begin by removing the bumper cover-to-body bolts and disconnecting any wiring or components that may obstruct the bumper's removal, then support the bumper, remove the retaining bolts, and detach the bumper and cover assembly, with installation being the reverse of removal. For models from 1990 through 1994, to remove the front bumper, take out the inner wheelwell panels and windshield washer fluid reservoir, while for the rear bumper, remove the mud flap and inner wheelwell panel, then support the bumper, remove the retaining bolts, and detach the assembly, again reversing the process for installation. In the 1995 through 1999 models, for the front bumper, remove the parking/turn signal light and headlight assemblies, inner wheelwell panels, and bumper cover upper mounting screws, then detach the bumper cover from various components, support the bumper, and remove the bracket-to-body bolts before taking off the assembly, ensuring to replace any damaged parts and adjust the headlights post-installation. For the rear bumper, remove the inner wheelwell panel, retaining screws, and upper mounting screws inside the trunk, support the assembly, and disconnect any wiring for the rear marker lights before removing the bumper. In the 2000 through 2002 models, for the front bumper, open the hood to remove retainers, headlight housings, and support bracket nuts, then raise the vehicle, remove retaining screws, and detach the bumper cover, with installation being the reverse. For the rear bumper, remove fasteners from the trim panel, taillight housings, mudguards, and screws securing the bumper cover, then remove the support bracket bolts and the cover itself. In the 2003 through 2005 models, for the front bumper, remove headlight housings, mounting clips, and bolts, then raise the vehicle and detach the bumper cover, with installation being the reverse. For the rear bumper, remove fasteners from the trim panel, mounting bolts, taillight housings, mudguard screws, and cover mounting bracket bolts before removing the cover. For models from 2006 and later, open the hood to remove push fasteners and bolts securing the upper bumper cover, loosen the front wheel lug nuts, raise the vehicle, and remove the front wheels and fender inner panel, then detach the bumper cover by removing screws and disengaging locator pins, with installation being the reverse. For the rear bumper, remove taillight housings, push-fastener clips, loosen rear wheel lug nuts, raise the vehicle, and remove the rear wheels and fender inner panel, then detach the bumper cover by removing fasteners and screws, pulling firmly to disengage locator pins, and finally reversing the process for installation.

Genuine Hyundai Accent Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

37 Bumpers found

View related parts
Hyundai Accent Front Bumper Cover
Part Number: 86511-1R010
$255.17 MSRP: $389.95
You Save: $134.78 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Front Bumper Cover
Part Number: 86511-1R000
$295.74 MSRP: $451.95
You Save: $156.21 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2014 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Rear Bumper Cover
Part Number: 86611-1R000
$294.13 MSRP: $449.49
You Save: $155.36 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P
View related parts
Hyundai Accent Front Bumper Cover
Part Number: 86511-J0000
$307.50 MSRP: $469.93
You Save: $162.43 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Front Bumper Cover
Part Number: 86511-1E010
$241.96 MSRP: $369.77
You Save: $127.81 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 86511-1E001, 86511-1E000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Rear Bumper-Cover
Part Number: 86611-J0000
$303.77 MSRP: $464.23
You Save: $160.46 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Rear Bumper Cover
Part Number: 86611-1E100
$289.64 MSRP: $442.63
You Save: $152.99 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Rear Bumper; Bumper Cover
- Position: Rear
- Replaces: 86611-1E120
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, Sedan - 3Door 5P
View related parts
Hyundai Accent Rear Bumper Cover
Part Number: 86611-1R200
$395.56 MSRP: $609.81
You Save: $214.25 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 5Door 5P
View related parts
Hyundai Accent Front Bumper Cover Assembly
Part Number: 86510-22201
$169.93 MSRP: $259.68
You Save: $89.75 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 86510-22201-PACK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door
View related parts
Hyundai Accent Rear Bumper Cover
Part Number: 86611-1E000
$289.64 MSRP: $442.63
You Save: $152.99 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Accent Front Bumper Cover Assembly
Part Number: 86510-22300
$169.93 MSRP: $259.68
You Save: $89.75 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 86510-22300-PACK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 4 Door
View related parts
Hyundai Accent Front Bumper Cover Assembly
Part Number: 86510-22261
$165.69 MSRP: $253.21
You Save: $87.52 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 86510-22260
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Middle Grade | 3 Door, 4 Door
View related parts
Hyundai Accent Front Bumper Cover Assembly
Part Number: 86510-22200
$169.93 MSRP: $259.68
You Save: $89.75 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly-Front Bumper
- Position: Front
- Replaced by: 86510-22A00
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door
View related parts
Hyundai Accent Rear Bumper Cover Assembly
Part Number: 86610-22200
$178.55 MSRP: $272.86
You Save: $94.31 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly-Rear Bumper; Bumper Cover
- Position: Rear
- Replaces: 86610-22200-PACK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door
View related parts
Hyundai Accent Rear Bumper Cover Assembly
Part Number: 86610-22600
$178.55 MSRP: $272.86
You Save: $94.31 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly-Rear Bumper; Bumper Cover
- Position: Rear
- Replaces: 86610-22600-PACK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door
View related parts
Hyundai Accent Front Bumper Cover
Part Number: 86511-1E000
$241.96 MSRP: $369.77
You Save: $127.81 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Bumper
- Position: Front
- Replaced by: 86511-1E010
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Front Bumper Cover
Part Number: 86511-25650
$132.69 MSRP: $202.77
You Save: $70.08 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 86511-25650-PACK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Front Bumper Cover
Part Number: 86511-1E001
$241.96 MSRP: $369.77
You Save: $127.81 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Bumper
- Position: Front
- Replaced by: 86511-1E010
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2011 Hyundai Accent | DOHC - MPI | Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Front Bumper Cover Assembly
Part Number: 86510-25200
Product Specifications
- Other Name: Cover Assembly-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 86510-25200-PACK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan
View related parts
Hyundai Accent Front Bumper Cover Assembly
Part Number: 86510-22620
Product Specifications
- Other Name: Cover Assembly-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Middle Grade | 3 Door, 4 Door

| Page 1 of 2 |Next >

1-20 of 37 Results

Hyundai Accent Bumper

The Hyundai Accent Bumper plays a vital role in safeguarding the front and rear sections of the vehicle. This component absorbs all low-speed hits so that the sheet metal, lights, and passengers remain protected. The Bumper is attached to strong brackets. It is mounted to the ends of the car. Furthermore, it distributes crash forces through the inner Bumper beam. The plastic skin is molded and does the rest. This multi-layered construction limits the expenses of repairs after parking biffs and supports overall crash safety ratings. The Bumper has seen a transformation over the years. From simple metal guards, it has evolved into the present-day lightweight shell which bounces back to shape after gentle contact. Moreover, this enhances the fuel economy of vehicles. Additionally, it does not compromise on protection and safety levels. Hyundai has designed the Bumper height of all models such that they match common impact zones in a collision to lessen damage to the hood or trunk. Those who are users of the Accent appreciate that the new Bumper with robust materials and precise mounting does not allow scrapes from curbs to spread. To keep a Hyundai Accent in showroom condition, the first check must be for cracks on this frontline part, followed by repainting over scuffs and changing the cover when the inner absorbers appear to crush.

If you are looking for affordable high-quality OEM Hyundai Accent Bumper, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Accent Bumper at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Accent Bumper Parts Questions & Experts Answers

Front Bumper Cover Assembly
86510-25200
Q: How to remove and install bumpers on Hyundai Accent?
A:
For models from 1986 through 1989, begin by removing the bumper cover-to-body bolts and disconnecting any wiring or components that may obstruct the bumper's removal, then support the bumper, remove the retaining bolts, and detach the bumper and cover assembly, with installation being the reverse of removal. For models from 1990 through 1994, to remove the front bumper, take out the inner wheelwell panels and windshield washer fluid reservoir, while for the rear bumper, remove the mud flap and inner wheelwell panel, then support the bumper, remove the retaining bolts, and detach the assembly, again reversing the process for installation. In the 1995 through 1999 models, for the front bumper, remove the parking/turn signal light and headlight assemblies, inner wheelwell panels, and bumper cover upper mounting screws, then detach the bumper cover from various components, support the bumper, and remove the bracket-to-body bolts before taking off the assembly, ensuring to replace any damaged parts and adjust the headlights post-installation. For the rear bumper, remove the inner wheelwell panel, retaining screws, and upper mounting screws inside the trunk, support the assembly, and disconnect any wiring for the rear marker lights before removing the bumper. In the 2000 through 2002 models, for the front bumper, open the hood to remove retainers, headlight housings, and support bracket nuts, then raise the vehicle, remove retaining screws, and detach the bumper cover, with installation being the reverse. For the rear bumper, remove fasteners from the trim panel, taillight housings, mudguards, and screws securing the bumper cover, then remove the support bracket bolts and the cover itself. In the 2003 through 2005 models, for the front bumper, remove headlight housings, mounting clips, and bolts, then raise the vehicle and detach the bumper cover, with installation being the reverse. For the rear bumper, remove fasteners from the trim panel, mounting bolts, taillight housings, mudguard screws, and cover mounting bracket bolts before removing the cover. For models from 2006 and later, open the hood to remove push fasteners and bolts securing the upper bumper cover, loosen the front wheel lug nuts, raise the vehicle, and remove the front wheels and fender inner panel, then detach the bumper cover by removing screws and disengaging locator pins, with installation being the reverse. For the rear bumper, remove taillight housings, push-fastener clips, loosen rear wheel lug nuts, raise the vehicle, and remove the rear wheels and fender inner panel, then detach the bumper cover by removing fasteners and screws, pulling firmly to disengage locator pins, and finally reversing the process for installation.