How to replace spark plug on Hyundai Accent?

The items that are needed to replace a spark plug include spark plug socket, torque wrench, ratchet, extension and wire-type feeler gauge. Buy correct new plugs for your specific vehicle ahead of time, adjust them to the right gap and change each plug one by one. Inspect every new plug for defects especially cracks in porcelain insulator.locate the outer electrode gaps with wire gauges for new plugs and modify if required. Use notched adjuster if the side electrode is not directly above the center electrode. For models from 1986 through 2005 do not mix up spark plug wires by working on only one plug at a time. Remove the boot and wire from a single spark plug by grasping the boot and giving it half a twist. With 2006 and later models remove ignition coils. In case available before continuing blow any dirt or foreign material away from the spark plug area using compressed air.Remove each old spark plugs then compare them with each other to determine how well engine runs generally.To avoid cross-threading when inserting spark plugs into their holes put a short section of rubber hose over the end of the spark plugs.In order to position it correctly over its hole,take advantage of this flexible hose that acts like universal joint.Should thread start going off track,the hose would slip over the part that has crossed threads so as to prevent damage being done on threads.Tighten it securely.Inserting The Plug Wire On The New Spark Plug Twist The Boot Around Until It Is Firmly Seated On The End Of The Spark Plug.The rest of these spark plugs should be installed following these same directions one at a time so we don't have any mix-ups with our wires.

Genuine Hyundai Accent Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Spark Plugs found

View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18846-10060
$24.07 MSRP: $33.54
You Save: $9.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark; Spark Plug
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18849-09070
$25.13 MSRP: $35.01
You Save: $9.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark; Spark Plug
- Replaces: 18849-09060
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18814-11051
$7.89 MSRP: $10.19
You Save: $2.30 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark; Spark Plug
- Manufacturer Note: BKR5ES-11
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-2011 Hyundai Accent | High Grade, Low Grade, Middle Grade | DOHC - MPI | 3 Door, 3 Door Sedan, 4 Door, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18823-11101
$3.61 MSRP: $4.66
You Save: $1.05 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark
- Manufacturer Note: RC10YC4
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-2006 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 3 Door Sedan, 4 Door, 4 Door Sedan
View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18846-10061
$21.65 MSRP: $27.98
You Save: $6.33 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark; Spark Plug
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P
View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18823-11101-D
$3.21 MSRP: $4.15
You Save: $0.94 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark
- Manufacturer Note: RC10YC4(SILCON COATING)
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18823-11101-2
$2.91 MSRP: $3.76
You Save: $0.85 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark
- Manufacturer Note: RC10YC4
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2006 Hyundai Accent | High Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Spark Plug Assembly
Part Number: 18823-11091
$3.16 MSRP: $4.08
You Save: $0.92 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plug Assembly-Spark
- Manufacturer Note: RC9YC4
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door

Hyundai Accent Spark Plug

The Hyundai Accent Spark Plug creates an exact electrical spark that ignites the fuel air mix to kick-start and pull strongly the subcompact engine on every drive. Each Spark Plug gets fired hundreds of times per minute under the heat and pressure. Its central electrode crosses a tiny gap to the ground strap to light the compressed charge so that there is smooth acceleration and steady idle. When a Spark Plug gets worn out, things like burned electrodes or carbon buildup can make for difficult cold mornings, compromise power, and increase fuel thirst. In other words, Accent is asking for new igniters. Spark Plug's have no less importance than any other engine component for your Hyundai Accent. Throughout the years, the usable Spark Plugs of the Hyundai compact have been primarily a single ground electrode copper core design. However, some later Accent editions adopted long life platinum or iridium tipped Spark Plug varieties which resist erosion and hold their gap for far beyond 60,000 miles. Regardless of the tip metal applied, what distinguishes the various Hyundai units is essentially the durability and service interval. All of them thread into the cylinder head, seal with a crush washer, and endure combustion stresses.

If you are looking for affordable high-quality OEM Hyundai Accent Spark Plug, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Accent Spark Plug at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Accent Spark Plug Parts Questions & Experts Answers

Spark Plug Assembly
18814-11051
Q: How to replace spark plug on Hyundai Accent?
A:
The items that are needed to replace a spark plug include spark plug socket, torque wrench, ratchet, extension and wire-type feeler gauge. Buy correct new plugs for your specific vehicle ahead of time, adjust them to the right gap and change each plug one by one. Inspect every new plug for defects especially cracks in porcelain insulator.locate the outer electrode gaps with wire gauges for new plugs and modify if required. Use notched adjuster if the side electrode is not directly above the center electrode. For models from 1986 through 2005 do not mix up Spark Plug Wires by working on only one plug at a time. Remove the boot and wire from a single spark plug by grasping the boot and giving it half a twist. With 2006 and later models remove ignition coils. In case available before continuing blow any dirt or foreign material away from the spark plug area using compressed air.Remove each old spark plugs then compare them with each other to determine how well engine runs generally.To avoid cross-threading when inserting spark plugs into their holes put a short section of rubber hose over the end of the spark plugs.In order to position it correctly over its hole,take advantage of this flexible hose that acts like universal joint.Should thread start going off track,the hose would slip over the part that has crossed threads so as to prevent damage being done on threads.Tighten it securely.Inserting The Plug Wire On The New Spark Plug Twist The Boot Around Until It Is Firmly Seated On The End Of The Spark Plug.The rest of these spark plugs should be installed following these same directions one at a time so we don't have any mix-ups with our wires.