What is the function and location of the Turn Signal Flasher on Hyundai Accent?

The turn signal/hazard flasher, which is a black plastic canister probably about 3 and a half inches high attached to the wiring harness under the dashboard, is for flashlighting the turn signals. In addition to this, it should be noted that when working without any complications, it is possible to hear a clicking sound. When the turn signals of one side go off and the flasher unit does not make the famous clicking sound, that implies a bad turn signal bulb. If both turn signals fail to function and blink, then it is caused by a bad output flasher, bad switch, bad fusible link, or an open or shorted turn signal switch. It is possible for the turn signal fuse to have gone off and this may be discovered just by a look at the fuse box and before replacing the fuse, one should check the wiring whether it has a short circuit. On the models of the year 2005 and earlier, the turn signal/hazard flasher is situated on the interior fuse and relay box place that is situated under the left end of the dash which means the kick panel has to be removed.

Genuine Hyundai Accent Turn Signal Flasher

Turn Signal Indicator Flasher

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Turn Signal Flashers found

View related parts
Hyundai Accent Flasher Module-Turn Signal
Part Number: 95550-39000
$65.06 MSRP: $91.40
You Save: $26.34 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 95550-33200, 95550-34000, 95550-33700
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-2006 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 3 Door Sedan, 4 Door, 4 Door Sedan
View related parts
Hyundai Accent Flasher Module-Turn Signal
Part Number: 95550-34000
$65.06 MSRP: $91.40
You Save: $26.34 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: DAESUNG
- Replaced by: 95550-39000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-2006 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 3 Door Sedan, 4 Door, 4 Door Sedan
View related parts
Hyundai Accent Flasher Module-Turn Signal
Part Number: 95550-1E000
$65.06 MSRP: $91.40
You Save: $26.34 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher, Flasher Relay
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Unit-Flasher
Part Number: 95550-2G000
$53.85 MSRP: $75.00
You Save: $21.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher, Flasher Relay
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2014 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Flasher Module-Turn Signal
Part Number: 95550-1R000
$166.46 MSRP: $233.87
You Save: $67.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher, Module
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Flasher Module-Turn Signal
Part Number: 95550-33200
$65.06 MSRP: $91.40
You Save: $26.34 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 95550-39000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door

Hyundai Accent Turn Signal Flasher

The Turn Signal Flasher of the Hyundai Accent ensures that your blinkers and hazard lights flash at a steady and eye-catching rhythm. Inside the fuse box lies this mini relay, which receives power every time you touch the stalk. It opens and closes the circuit rapidly so that the lamps flash on and off rather than glowing solid. Initially, the models applied the thermal style Turn Signal Flasher, which heats a metal strip that is springy. This metal strip bends and makes contact. Thereafter, it cools down and the process repeats. This results in both the blink and click sound. Subsequent models of the Hyundai Accent transitioned to an electronic solid-state Turn Signal Flasher. This design employs a transistor and timing chip for flasher operation, eliminating the requirement for heat. Moreover, it can easily accommodate multiple bulbs or contemporary LEDs while still providing a characteristic click sound. Both versions essentially serve the same purpose, namely signaling your intention to traffic with the Turn Signal Flasher and activating the hazard pattern during emergencies. The electronic unit, however, reacts faster, lasts longer, and is not fooled by the lower current draw of LED lamps. When a Turn Signal Flasher fails, the indicators stop or blink erratically. Therefore, a direct replacement suited to your vehicle is essential for every Hyundai Accent driver.

If you are looking for affordable high-quality OEM Hyundai Accent Turn Signal Flasher, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Accent Turn Signal Flasher at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Accent Turn Signal Flasher Parts Questions & Experts Answers

Flasher Module-Turn Signal
95550-39000
Q: What is the function and location of the Turn Signal Flasher on Hyundai Accent?
A:
The turn signal/hazard flasher, which is a black plastic canister probably about 3 and a half inches high attached to the wiring harness under the dashboard, is for flashlighting the turn signals. In addition to this, it should be noted that when working without any complications, it is possible to hear a clicking sound. When the turn signals of one side go off and the flasher unit does not make the famous clicking sound, that implies a bad turn signal bulb. If both turn signals fail to function and blink, then it is caused by a bad output flasher, bad switch, bad fusible link, or an open or shorted turn signal switch. It is possible for the turn signal Fuse to have gone off and this may be discovered just by a look at the fuse box and before replacing the fuse, one should check the wiring whether it has a short circuit. On the models of the year 2005 and earlier, the turn signal/hazard flasher is situated on the interior fuse and relay box place that is situated under the left end of the dash which means the kick panel has to be removed.