Inside the trunk, remove the trim panels to access the trunk release and fuel door cables, then disconnect the fuel door release cable bolts. Detach all clips holding the cables to the body and remove the carpeting, along with the screw, to detach the cover from the cable actuating lever housing next to the driver's seat. Remove the actuating lever housing and detach the cables from the lever. Attach a piece of thin wire to the end of the cable, then work in the trunk compartment to pull the cable assembly towards the rear of the vehicle until the wire is visible. Finally, attach the wire to the front of the new cable and fish it back through the body for attachment to the lever, completing the installation in reverse order of removal.