On tilt steering columns, move the column to the lowest position. For 2006 and earlier models, remove the screws from the lower column cover, then detach and remove the upper and lower covers. For 2007 and later models, there is one screw in the bottom of the lower cover; turn the steering wheel to access the other two screws in the rear part of the assembly. For models from 2007 through 2016 and 2013 through 2017 GT models, separate the halves and remove the lower and upper steering column covers. For 2017 and later models, except GT models, the upper steering column cover and instrument cluster bezel are one piece, and the upper steering column cover/instrument cluster bezel can be removed by following specific steps. Installation is the reverse of the removal procedure.