The horn is located in front of the radiator for 2011 and earlier models, while for 2012 and later models, it is found in the lower left corner of the vehicle, ahead of the left front wheel well. For 2011 and earlier models, begin by opening the hood, then disconnect the horn electrical connector, unbolt the horn, and remove it from the radiator support. For models from 2006 to 2011, the front grille must be removed before disconnecting the horn electrical connector, unbolting the horn, and taking it out. Installation follows the reverse order of removal. For 2012 and later models, raise the vehicle and support it securely on jackstands, then remove the driver's side inner fender well liner, disconnect the horn electrical connector, remove the horn mounting bolt, and take out the horn. Installation is again the reverse of removal.