How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch and Trunk Latch be lubricated on Hyundai Excel?

Every 3000 miles of every 3 months the hinges and latch assemblies of the doors, hood and trunk should be smeared with light oil or lock lubricant drop or two. Further, the door latch strikers should be greased with a thin layer of grease to reduce the chances of frequent wearing, and to ensure smooth operations of the door latch strikers. It is also recommended that the door and the trunk locks should be lubricated through the help of a spray-on graphite lubricant.

Genuine Hyundai Excel Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Trunk Latches found

View related parts
Hyundai Excel Trunk Lid Lock Assembly
Part Number: 81250-24A00
$64.49 MSRP: $90.61
You Save: $26.12 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Cylinder, Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1990-1994 Hyundai Excel | High Grade, Low Grade, Middle Grade | 4 Door
View related parts
Hyundai Excel Trunk Lid Latch Assembly
Part Number: 81230-24000
$50.30 MSRP: $70.06
You Save: $19.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Trunk Lid
- Replaced by: 81240-24000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1990-1994 Hyundai Excel | Low Grade, Middle Grade | 4 Door
View related parts
Hyundai Excel Trunk Lid Latch Assembly
Part Number: 81240-24000
$50.30 MSRP: $70.06
You Save: $19.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Trunk Lid; Lock Assembly
- Replaces: 81230-24000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1990-1994 Hyundai Excel | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door, 5 Door
View related parts
Hyundai Excel Trunk Lid Latch Assembly
Part Number: 81230-21030
$15.11 MSRP: $19.53
You Save: $4.42 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Trunk Lid; Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1985-1989 Hyundai Excel
View related parts
Hyundai Excel Tail Gate Latch Assembly
Part Number: 81230-21110
$21.49 MSRP: $27.77
You Save: $6.28 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Tail Gate; Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1985-1989 Hyundai Excel

Hyundai Excel Trunk Latch

Reliable strength helps give access control and secures the cargo area of the Hyundai Excel Trunk Latch. Throughout the years, owners continue to praise the soft touch of the Trunk Latch on every Excel. This enables an easy engagement with the striker to keep the lid flush with space even during bumpy rides on tough roads. A spring driven claw grabs striker inside stamped steel body of this Trunk Latch design. The low friction pawl reduces wear by softening each click. As the device is a perfect fit for the rear sheet metal of all Hyundai Excel from 1985 to 1999, one reliable Trunk Latch can be applied across different trims without any further tweaks. The Trunk Latch opens just enough for the hinges to lift the deck lid, saving the driver from a finger pinch and a time-consuming pull with the cabin lever or a key turn. According to this motion, efficiency is the name of the game. It saves those on board from using the lifts as well as preserves the weather seal. This is done in order to enable each Hyundai to be as dry and aerodynamic as possible at speed. The added security comes from the Trunk Latch's dual catch positions that make accidental openings nearly impossible. It is an edge with families with backpacks and groceries. According to many drivers of older carbureted Excel models, as well as later fuel injected Excel sedans, the fitment of parts is identical. The shared platform means that Hyundai can reduce parts stocking and allow greater confidence in a long trip. The unit is purely mechanical in nature and does not draw electrical power from the car battery. As such, the classic Hyundai batteries will last far longer than before and the older Excel coupes will retain their lightweight essence. The addition of corrosion-resistant coatings to the Trunk Latch ensures it will still snap shut decades later, proving there's quality throughout the Hyundai lineup.

If you are looking for affordable high-quality OEM Hyundai Excel Trunk Latch, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Excel Trunk Latch at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Excel Trunk Latch Parts Questions & Experts Answers

Trunk Lid Lock Assembly
81250-24A00
Q: How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch and Trunk Latch be lubricated on Hyundai Excel?
A:
Every 3000 miles of every 3 months the hinges and latch assemblies of the doors, Hood and trunk should be smeared with light oil or lock lubricant drop or two. Further, the door latch strikers should be greased with a thin layer of grease to reduce the chances of frequent wearing, and to ensure smooth operations of the door latch strikers. It is also recommended that the door and the trunk locks should be lubricated through the help of a spray-on graphite lubricant.