This procedure is normally applied in circumstances where the master key has been lost and it is required to insert an additional master key. For this process, one needs to have the ID key, to which the Hyundai logo corresponds to. If the ID key is missing, the procedure should be performed at a dealer service department or at a repair shop possessing hi-scan diagnostic equipment. Initial, insert the ID key into the
Ignition Lock Cylinder and switch it to the On position followed by the Off position. In ten seconds introduce the key to be enrolled into the ignition lock cylinder and turn it to the On position and then to the Off position, the new key is now recognised by the immobiliser system. If another key is to be added, the procedure is done as the previous steps but with a reminder that only two master keys can be registered.