What is the location of the Idle Control Valve and How to remove and install it on Hyundai Santa Fe?

The Idle Control Valve is located below the throttle body on models so equipped. Begin by disconnecting the cable from the negative battery terminal. Next, remove the throttle body and disconnect the sensor wiring harness. After that, remove the Idle Control Valve mounting screws and take out the Idle Control Valve. Discard the old Idle Control Valve gasket. For installation, reverse the removal process, ensuring to use a new gasket and securely tighten the Idle Control Valve mounting screws.

Genuine Hyundai Santa Fe Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idle Control Valve found

View related parts
Hyundai Santa Fe Actuator Assembly-Idle Speed
Part Number: 35150-33010
$253.47 MSRP: $356.11
You Save: $102.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Idler Speed Control
- Manufacturer Note: SELECTIVE USE
- Replaces: 35150-33001
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon

Hyundai Santa Fe Idle Control Valve

If you are looking for affordable high-quality OEM Hyundai Santa Fe Idle Control Valve, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Santa Fe Idle Control Valve at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Santa Fe Idle Control Valve Parts Questions & Experts Answers

Actuator Assembly-Idle Speed
35150-33010
Q: What is the location of the Idle Control Valve and How to remove and install it on Hyundai Santa Fe?
A:
The Idle Control Valve is located below the throttle body on models so equipped. Begin by disconnecting the cable from the negative battery terminal. Next, remove the throttle body and disconnect the sensor wiring harness. After that, remove the Idle Control Valve mounting screws and take out the Idle Control Valve. Discard the old Idle Control Valve gasket. For installation, reverse the removal process, ensuring to use a new gasket and securely tighten the Idle Control Valve mounting screws.

Related Hyundai Santa Fe Parts

Browse by Year

2006 Idle Control Valve 2005 Idle Control Valve 2004 Idle Control Valve 2003 Idle Control Valve 2002 Idle Control Valve 2001 Idle Control Valve 2000 Idle Control Valve