Hyundai 41100-23031 Disc Assembly-Clutch

You can Select Your Vehicle to check if 41100-23031 fits your vehicle.

Access to the clutch components is accomplished by removing the transaxle, supporting the engine with an engine hoist or jack, and ensuring the oil pan is protected. The clutch fork and release bearing can remain attached to the transaxle housing. To support the clutch disc during removal, a clutch alignment tool is installed. The flywheel and pressure plate should be inspected for indexing marks and any defects. The clutch disc, flywheel, and pressure plate should be inspected for wear and damage. The release bearing should be replaced along with the clutch disc. The pressure plate should be checked for wear, cracks, and overheating. The flywheel and pressure plate machined surfaces should be cleaned before installation. The clutch disc and pressure plate should be positioned against the flywheel with an alignment tool. The pressure plate-to-flywheel bolts should be tightened finger tight and then gradually tightened in a crisscross pattern. The clutch release bearing should be lubricated and installed. Finally, the transaxle and all previously removed components should be reinstalled and tightened.