How to remove and install an A/C Condenser on a Hyundai Accent?

Have the system discharged and recovered by dealership or other properly equipped repair facility. On 1986 through 1994 models, remove the radiator grille. On 1990 through 1994 models, remove the radiator. On 1995 through 2002 models, remove the two upper radiator mounting bracket bolts and remove the fresh air inlet duct. On 2012 and later models, remove the front bumper cover. Disconnect the refrigerant lines from the condenser. Be sure to use a back-up wrench to avoid twisting the lines. Note: On 1990 through 1994 models, a special spring-lock coupling tool is required to disconnect the refrigerant lines. Immediately cap the open fittings to prevent the entry of dirt and moisture. Drain the engine coolant and remove the radiator and fan assembly. Unbolt the condenser and lift it out of the vehicle. Store it upright to prevent oil loss. Installation: If reusing the condenser, straighten the condenser fins using a fin comb and blow out the debris with compressed air. Caution: Use a face shield and goggles if using compressed air to clean the condenser. Installation is the reverse of removal. If a new condenser was installed, add the proper amount (and type) of refrigerant oil to the system. Have the system evacuated, recharged, and leak tested.

Genuine Hyundai Accent A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 A/C Condensers found

View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-1R000
$368.44 MSRP: $568.00
You Save: $199.56 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2014 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-H9100
$316.19 MSRP: $483.21
You Save: $167.02 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-1W001
$365.88 MSRP: $564.05
You Save: $198.17 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Replaces: 97606-1W000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-1W000
$365.88 MSRP: $564.05
You Save: $198.17 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler
- Replaced by: 97606-1W001
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-1E000
$412.29 MSRP: $635.60
You Save: $223.31 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-25600
$468.69 MSRP: $722.54
You Save: $253.85 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-25500
$478.51 MSRP: $737.68
You Save: $259.17 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-22010
$519.31 MSRP: $800.60
You Save: $281.29 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-22050
$519.31 MSRP: $800.60
You Save: $281.29 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler
- Replaced by: 97606-22051
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door
View related parts
Hyundai Accent Cooler Condenser Assembly
Part Number: 97606-22051
$519.31 MSRP: $800.60
You Save: $281.29 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-Cooler; Condenser
- Replaces: 97606-22050
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door

Hyundai Accent A/C Condenser

Hyundai Accent A/C Condenser, fast to get rid of heat from the cabin, will lead hot refrigerant through aluminum tubes and dense fins to discharge energy into passing air. Positioned in front of the radiator, the A/C Condenser receives high-pressure vapor from the compressor, cools it, and converts it back to liquid so that the cycle can repeat itself at the evaporator. Throughout every generation of Hyundai Accent, A/C Condenser maintains the same lightweight tube and fin structure due to its high heat transfer performance and lightweight. Early versions applied slightly thicker cores for increased surface area, but later Hyundai Accent models switched to slimmer yet longer units to accommodate tighter nose styling. The basic method of sending refrigerant through a maze of passages touching air-swept fins never changed. Each A/C Condenser has the added benefit of reducing the strain on the compressor so that vents can blow colder for extended trips. Modern-day Accent drivers rely on the A/C Condenser, and every Hyundai owner is fortunate to have the critical role of the A/C Condenser in the removal of heat in the cabin and the additional heat generated during compression.

If you are looking for affordable high-quality OEM Hyundai Accent A/C Condenser, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Accent A/C Condenser at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Accent A/C Condenser Parts Questions & Experts Answers

Cooler Condenser Assembly
97606-1R000
Q: How to remove and install an A/C Condenser on a Hyundai Accent?
A:
Have the system discharged and recovered by dealership or other properly equipped repair facility. On 1986 through 1994 models, remove the Radiator grille. On 1990 through 1994 models, remove the radiator. On 1995 through 2002 models, remove the two upper radiator mounting bracket bolts and remove the fresh air inlet duct. On 2012 and later models, remove the front bumper cover. Disconnect the refrigerant lines from the condenser. Be sure to use a back-up wrench to avoid twisting the lines. Note: On 1990 through 1994 models, a special spring-lock coupling tool is required to disconnect the refrigerant lines. Immediately cap the open fittings to prevent the entry of dirt and moisture. Drain the engine coolant and remove the radiator and fan assembly. Unbolt the condenser and lift it out of the vehicle. Store it upright to prevent oil loss. Installation: If reusing the condenser, straighten the condenser fins using a fin comb and blow out the debris with compressed air. Caution: Use a face shield and goggles if using compressed air to clean the condenser. Installation is the reverse of removal. If a new condenser was installed, add the proper amount (and type) of refrigerant oil to the system. Have the system evacuated, recharged, and leak tested.