How to install a new Rack and Pinion Boot on Hyundai Accent?

Loosen the lug nuts, raise the vehicle and support it securely on jackstands. Remove the front wheel(s). Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps and slide the boot off. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.

Genuine Hyundai Accent Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack and Pinion Boots found

View related parts
Hyundai Accent Bellows-Steering Gear Box
Part Number: 57728-17000
$38.58 MSRP: $53.74
You Save: $15.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Bellows-Steering Gear Box
Part Number: 57740-2K001
$54.81 MSRP: $76.34
You Save: $21.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Bellows-Steering Gear Box
Part Number: 56528-H8000
$32.04 MSRP: $44.63
You Save: $12.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Bellows-Steering Gear Box
Part Number: 56528-24000
Product Specifications
- Other Name: Boot, Inner Tie Rod Boot, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-2006 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 3 Door Sedan, 4 Door, 4 Door Sedan

Hyundai Accent Rack and Pinion Boot

The Hyundai Accent Rack and Pinion Boot serves to protect the steering rack from dirt and moisture while keeping lubricant inside. This ensures that the wheels respond correctly. At both ends of the rack tube, the Rack and Pinion Boot bellows with steering movement to allow the inner tie-rod to articulate without exposing the gears. Whether early Accent models applied simpler manual steering or later units adopted hydraulic assist, all Hyundai Rack and Pinion Boot prevents dirt from damaging seals and keeps fluid pressure constant. Constructed from resilient rubber, the Rack and Pinion Boot also prevents the washout of lubricant through road splash to impede metal-on-metal grind, which makes for a loose on-center feel or wandering. A torn steering bellows on a Hyundai Accent rapidly permits debris to eat the rack teeth, so the new Rack and Pinion Boot is a small part that prevents an expensive rack replacement and smooths steering that is light and precise on any trim. Check your Hyundai Accent's boot regularly by visually inspecting it for cracks or signs of leaking fluid.

If you are looking for affordable high-quality OEM Hyundai Accent Rack and Pinion Boot, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Accent Rack and Pinion Boot at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Accent Rack and Pinion Boot Parts Questions & Experts Answers

Bellows-Steering Gear Box
57728-17000
Q: How to install a new Rack and Pinion Boot on Hyundai Accent?
A:
Loosen the lug nuts, raise the vehicle and support it securely on jackstands. Remove the front wheel(s). Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps and slide the boot off. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.