How to remove and install the hood cable and hood latch on Hyundai Sonata?

For 2010 and earlier models, begin by removing the radiator guard by taking out the fasteners. For 2011 and later models, the bumper cover must be taken off to access the hood latch and cable assembly. Scribe a line around the latch for alignment during installation, then remove the retaining bolts that secure the hood latch to the radiator support and take out the latch. Disconnect the Hood Cable by disengaging it from the latch. Installation follows the reverse order of removal, ensuring the latch is adjusted so the hood engages securely when closed and the hood bumpers are slightly compressed. In the passenger compartment, lift the hood release handle lever upward, then pull down on the cable housing end to disengage the cable from the hood release lever handle. Attach a piece of thin wire or string to the end of the cable, then disconnect the Hood Cable from the latch. Remove the left inner plastic fender well and unclip all cable retaining clips on the radiator support and outer fender well. Pull the cable forward into the wheel well until the wire or string is visible, then remove it from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull it back through the body until it reaches the inside handle. In the passenger compartment, install the new cable into the hood release lever, ensuring the cable housing fits snugly into the notch in the handle bracket, and pull on the cable until the cable stop seats in the grommet on the body. Complete the installation by reversing the removal steps.

Genuine Hyundai Sonata Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Hood Latches found

View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-C1100
$124.89 MSRP: $175.47
You Save: $50.58 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2015-2017 Hyundai Sonata | DOHC - GDI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-3S000
$65.49 MSRP: $92.02
You Save: $26.53 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2009-2014 Hyundai Sonata | DOHC - GDI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-3K000
$60.40 MSRP: $84.85
You Save: $24.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2010 Hyundai Sonata | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-3D000
$60.40 MSRP: $84.85
You Save: $24.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2001-2005 Hyundai Sonata | High Grade, Middle Grade | 4 Door Sedan
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-L1000
$140.17 MSRP: $196.94
You Save: $56.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2020-2023 Hyundai Sonata | DOHC - GDI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-C1500
$124.89 MSRP: $175.47
You Save: $50.58 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2019 Hyundai Sonata | DOHC - GDI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-38000
$56.71 MSRP: $78.98
You Save: $22.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1998-2001 Hyundai Sonata | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-33000
$24.00 MSRP: $31.02
You Save: $7.02 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1988-1993 Hyundai Sonata | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-34000
$43.10 MSRP: $60.03
You Save: $16.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood
- Replaced by: 81130-34001
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1993-1998 Hyundai Sonata | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-34001
$43.10 MSRP: $60.03
You Save: $16.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch Assembly, Lock
- Replaces: 81130-34000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1993-1998 Hyundai Sonata | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Sonata Hood Latch Assembly
Part Number: 81130-34501
$43.10 MSRP: $60.03
You Save: $16.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1993-1998 Hyundai Sonata | High Grade, Middle Grade | 4 Door

Hyundai Sonata Hood Latch

The Hyundai Sonata Hood Latch keeps the sedan's hood locked tight while protecting vital engine parts and providing quick service access. Over the years, Hyundai incorporated a two-stage Hood Latch system combining an internal handle and cable with a front safety catch so that even if the main clasp were to slip, the secondary hook still stops a sudden fly-up. Early editions of the Sonata had all-steel levers and catches, but modern Sonata vehicles have reinforced plastic housings and smoother springs to combat corrosion and reduce noise. However, the basic Hood Latch function of preventing theft and protecting the windshield during a crash remains the same. A driver pulls the handle in the cabin, the cable pulls the Hood Latch, followed by a squeeze of the exterior catch allowing the panel to be lifted for maintenance. Optional lockable catch kits, latch supports, and release assemblies share precise factory dimensions, allowing any Sonata owner to swap in a different Hood Latch on their Hyundai without having to drill new holes. These solid upgrades keep Hyundai motorists confident at every stoplight.

If you are looking for affordable high-quality OEM Hyundai Sonata Hood Latch, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Sonata Hood Latch at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Sonata Hood Latch Parts Questions & Experts Answers

Hood Latch Assembly
81130-3K000
Q: How to remove and install the hood cable and hood latch on Hyundai Sonata?
A:
For 2010 and earlier models, begin by removing the radiator guard by taking out the fasteners. For 2011 and later models, the bumper cover must be taken off to access the hood latch and cable assembly. Scribe a line around the latch for alignment during installation, then remove the retaining bolts that secure the hood latch to the radiator support and take out the latch. Disconnect the Hood Cable by disengaging it from the latch. Installation follows the reverse order of removal, ensuring the latch is adjusted so the hood engages securely when closed and the hood bumpers are slightly compressed. In the passenger compartment, lift the hood release handle lever upward, then pull down on the cable housing end to disengage the cable from the hood release lever handle. Attach a piece of thin wire or string to the end of the cable, then disconnect the Hood Cable from the latch. Remove the left inner plastic fender well and unclip all cable retaining clips on the radiator support and outer fender well. Pull the cable forward into the wheel well until the wire or string is visible, then remove it from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull it back through the body until it reaches the inside handle. In the passenger compartment, install the new cable into the hood release lever, ensuring the cable housing fits snugly into the notch in the handle bracket, and pull on the cable until the cable stop seats in the grommet on the body. Complete the installation by reversing the removal steps.