How to remove and install the ignition lock cylinder and ignition switch on Hyundai Elantra?

Disconnect the negative battery cable and remove the steering column covers along with the lower instrument panel cover. For 2006 and earlier models, to remove the electrical portion of the ignition switch, follow the harness back to disconnect the electrical connector, then remove the screw and detach the switch from the Ignition Lock Cylinder housing, which is retained by one screw. The switch/Ignition Lock Cylinder housing is clamped to the steering column by shear-head bolts; use a chisel and hammer to tap the bolts counterclockwise to unscrew them. Remove the Ignition Lock Cylinder/ignition switch assembly from the steering column, then mount the new Ignition Lock Cylinder assembly and install new shear-head bolts, tightening them securely without breaking the heads off at this time. Insert the key to check the Ignition Lock Cylinder and steering column lock for proper operation, and once satisfied, tighten the shear-head bolts until the heads break off. The remainder of installation is the reverse of removal. For 2007 and later models, on 2011 through 2016 models, remove the wiper switch from the multi-function switch. For 2007 through 2010 models, turn the key to the ON position, remove the screw at the rear of the switch, and take out the ignition switch. If necessary, remove the screw from the side of the assembly to take out the door warning switch and the light. For 2011 and later models, the Ignition Lock Cylinder is mounted into the ignition switch; to remove it, turn the key to the ACC position, use a small pointed tool to depress the button on the side or bottom of the Ignition Lock Cylinder housing, and pull out the Ignition Lock Cylinder. Installation is the reverse of removal. For the start/stop button in keyless entry, remove the driver's knee bolster and the center left side trim panel fasteners and trim panel. Remove the star/stop button trim panel fastener, disengage the trim panel mounting clips, and remove the panel. Disconnect the electrical connector to the button, depress the two retaining tabs on the button, and push the button through the trim panel. Installation is the reverse of removal.

Genuine Hyundai Elantra Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Ignition Lock Cylinders found

View related parts
Hyundai Elantra Steering & Ignition Lock Cylinder Assembly
Part Number: 81920-2HB10
$229.44 MSRP: $322.35
You Save: $92.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly-Steering & Ignition Lock; Ignition Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-28C00
$286.60 MSRP: $402.66
You Save: $116.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Ignition Lock Cylinder, Lock Housing
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Steering & Ignition Lock Cylinder Assembly
Part Number: 81920-2HB00
$210.80 MSRP: $296.16
You Save: $85.36 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly-Steering & Ignition Lock; Ignition Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-28C10
$413.79 MSRP: $586.47
You Save: $172.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Ignition Lock Cylinder, Lock Housing
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-2DA20
$473.34 MSRP: $670.87
You Save: $197.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Steering Lock
- Replaces: 81900-2DB20
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-2DA30
$512.59 MSRP: $726.50
You Save: $213.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Steering Lock
- Replaces: 81900-2DB30
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-2DA70
$512.59 MSRP: $726.50
You Save: $213.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-2DA90
$512.59 MSRP: $726.50
You Save: $213.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Steering & Ignition Lock Cylinder Assembly
Part Number: 81920-2HA00
$162.72 MSRP: $228.61
You Save: $65.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly-Steering & Ignition Lock; Ignition Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006 Hyundai Elantra | Middle Grade | 4 Door Sedan
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-29D01
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5
View related parts
Hyundai Elantra Steering & Ignition Lock Cylinder Assembly
Part Number: 81920-2HA10
Product Specifications
- Other Name: Cylinder Assembly-Steering & Ignition Lock; Ignition Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006 Hyundai Elantra | High Grade | 4 Door Sedan
View related parts
Hyundai Elantra Steering & Ignition Lock Assembly
Part Number: 81900-29B01
Product Specifications
- Other Name: Lock Assembly-Steering & Ignition; Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5

Hyundai Elantra Ignition Lock Cylinder

The driver can activate the ignition, steer, and lock the Hyundai Elantra via the Ignition Lock Cylinder, which connects a coded key to the starter and steering column. Earlier designs installed the Ignition Lock Cylinder within the steering column. Only the proper metal key was able to turn this cylinder to the ACC, ON, or START positions. This sent battery current to the components, ignition, and fuel. The design also locked the steering wheel and, in the case of automatic transmissions, the automobile gear shifter in Park when the key was removed, thus curbing theft. In the 1980s, a transponder chip was added so that even if thieves force the Ignition Lock Cylinder, the computer blocks cranking without a matching signal. Present-day Hyundai sedans have included a push button start in their vehicles that eliminates the old Ignition Lock Cylinder but does retain the same electronic check. Many Hyundai Elantra drivers continue to depend on a traditional Ignition Lock Cylinder; however, wear to its wafers or switch contacts may make turning a challenge and kill components and stall the engine on bumpy roads. Replacement depends on build year since some Elantra cars keep the column unit while newer Elantra trims use an integrated start module. Regardless of the parts the key fob does have, all Hyundais want quick starting, steady power, and prevention from theft.

If you are looking for affordable high-quality OEM Hyundai Elantra Ignition Lock Cylinder, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Elantra Ignition Lock Cylinder at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Elantra Ignition Lock Cylinder Parts Questions & Experts Answers

Steering & Ignition Lock Cylinder Assembly
81920-2HB10
Q: How to remove and install the ignition lock cylinder and ignition switch on Hyundai Elantra?
A:
Disconnect the negative battery cable and remove the steering column covers along with the lower instrument panel cover. For 2006 and earlier models, to remove the electrical portion of the ignition switch, follow the harness back to disconnect the electrical connector, then remove the screw and detach the switch from the Ignition Lock Cylinder housing, which is retained by one screw. The switch/Ignition Lock Cylinder housing is clamped to the steering column by shear-head bolts; use a chisel and hammer to tap the bolts counterclockwise to unscrew them. Remove the Ignition Lock Cylinder/ignition switch assembly from the steering column, then mount the new Ignition Lock Cylinder assembly and install new shear-head bolts, tightening them securely without breaking the heads off at this time. Insert the key to check the Ignition Lock Cylinder and steering column lock for proper operation, and once satisfied, tighten the shear-head bolts until the heads break off. The remainder of installation is the reverse of removal. For 2007 and later models, on 2011 through 2016 models, remove the Wiper Switch from the multi-function switch. For 2007 through 2010 models, turn the key to the ON position, remove the screw at the rear of the switch, and take out the ignition switch. If necessary, remove the screw from the side of the assembly to take out the door warning switch and the light. For 2011 and later models, the Ignition Lock Cylinder is mounted into the ignition switch; to remove it, turn the key to the ACC position, use a small pointed tool to depress the button on the side or bottom of the Ignition Lock Cylinder housing, and pull out the Ignition Lock Cylinder. Installation is the reverse of removal. For the start/stop button in keyless entry, remove the driver's knee bolster and the center left side trim panel fasteners and trim panel. Remove the star/stop button trim panel fastener, disengage the trim panel mounting clips, and remove the panel. Disconnect the electrical connector to the button, depress the two retaining tabs on the button, and push the button through the trim panel. Installation is the reverse of removal.