How to adjust the shift cable on Hyundai Elantra?

Whenever the shift lever inside the vehicle is operated from Neutral to other positions, it should move with smoothness and precision, at the same time, the shift indicator should show the correct gear. Correction of the SAI: In case the indicator is out of position, the shift cable may be adjusted with the help of turning the lever to Neutral position, then the hood must be opened to dismantled the swivel nut of the manual shift lever placed on the transaxle while aligning the holes of the switch arm to the housing ones. For specific models, adjustments could be make at the shift lever on the transaxle through the adjustment nut which can be loosened then the cable can be pushed inward to eliminate the freeplay that may be present. Subsequently, engage the shift range lever on the transaxle into Neutral, then slightly unstowr the switch housing bolts, set the holes in the switch 'on top' the lever, and finally turn the swivel nut and switch bolts tightly. After that, inspect the transaxle operation in each of the shift lever positions It should be possible to hear the starter only when in the Park and Neutral positions. For replacement, unplug the cable from the shift lever and then use a pair of pliers to remove the large C-clips that holds the other end of the cable to the shift bracket. On some models, unscrew the nut and small metal clip that hold the cable in place in relation to the transaxle shift lever and housing bracket, or shove the cable off the cable bracket. Pull out the two shift cable grommet bolts that fix the grommet to the bulkhead; and unbend the shift cable from vehicle assembly. In term of installation, you have to feed the shift cable through the bulkhead opening then retract it in the console area then secure the C-clip into the bracket on the shift lever assembly Or, press the cable into the cable bracket on the transaxle in specific models. Fit the shift cable to the lever of the transaxle range sensor using the C-clip and put the grommet in its place; tighten the bolts. In the console area, tighten the screws of the shift position indicator assembly. Finally, correctly position the shift cable and then install the floor console with shifting the lever to and fro to the appropriate positions.

Genuine Hyundai Elantra Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Shift Cables found

View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 46790-2H100
$104.46 MSRP: $146.76
You Save: $42.30 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever; Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-2D100
$151.93 MSRP: $213.45
You Save: $61.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-3X510
$135.09 MSRP: $189.79
You Save: $54.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever; Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2014-2015 Hyundai Elantra | DOHC - GDI, DOHC - MPI | Coupe - 2Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-2H200
$192.61 MSRP: $270.61
You Save: $78.00 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transaxle Lever; Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 46790-2D100
$69.70 MSRP: $97.92
You Save: $28.22 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-F2200
$179.27 MSRP: $251.87
You Save: $72.60 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever; Cable, Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2016-2020 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-F2400
$188.24 MSRP: $264.47
You Save: $76.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever; Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2016-2020 Hyundai Elantra | DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-2H500
$192.61 MSRP: $270.61
You Save: $78.00 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transaxle Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-3Y100
$272.10 MSRP: $382.29
You Save: $110.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever; Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2013 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 43760-28701
$65.98 MSRP: $92.69
You Save: $26.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Manufacturer Note: KYUNGCHANG
- Replaces: 43760-28708
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 43760-28708
$65.98 MSRP: $92.69
You Save: $26.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Manufacturer Note: SAMYOUNG
- Replaced by: 43760-28701
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 43760-28730
$65.98 MSRP: $92.69
You Save: $26.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Cable Assy-Atm Lever
Part Number: 46790-AA200
$87.63 MSRP: $123.11
You Save: $35.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 46790-F2400
$100.66 MSRP: $141.42
You Save: $40.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever; Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2016-2020 Hyundai Elantra | DOHC - MPI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-28007
$138.10 MSRP: $194.03
You Save: $55.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transaxle Lever
- Manufacturer Note: SAMYOUNG
- Replaced by: 43794-28005
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-F3200
$149.07 MSRP: $209.44
You Save: $60.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever; Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2016-2020 Hyundai Elantra | DOHC - MPI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 46790-2D101
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-3X200
$135.09 MSRP: $189.79
You Save: $54.70 (29%)
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever; Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2013 Hyundai Elantra | DOHC - GDI, DOHC - MPI | Coupe - 2Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Elantra Automatic Transmission Lever Cable Assembly
Part Number: 46790-F2100
$118.27 MSRP: $166.16
You Save: $47.89 (29%)
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever; Cable, Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2016-2020 Hyundai Elantra | DOHC - MPI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Manual Transmission Lever Cable Assembly
Part Number: 43794-3Y500
$225.09 MSRP: $316.24
You Save: $91.15 (29%)
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever; Control Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2014-2015 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P

| Page 1 of 2 |Next >

1-20 of 31 Results

Hyundai Elantra Shift Cable

If you are looking for affordable high-quality OEM Hyundai Elantra Shift Cable, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Elantra Shift Cable at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Elantra Shift Cable Parts Questions & Experts Answers

Automatic Transmission Lever Cable Assembly
46790-2H100
Q: How to adjust the shift cable on Hyundai Elantra?
A:
Whenever the shift lever inside the vehicle is operated from Neutral to other positions, it should move with smoothness and precision, at the same time, the shift indicator should show the correct gear. Correction of the SAI: In case the indicator is out of position, the shift cable may be adjusted with the help of turning the lever to Neutral position, then the hood must be opened to dismantled the swivel nut of the manual shift lever placed on the transaxle while aligning the holes of the switch arm to the housing ones. For specific models, adjustments could be make at the shift lever on the transaxle through the adjustment nut which can be loosened then the cable can be pushed inward to eliminate the freeplay that may be present. Subsequently, engage the shift range lever on the transaxle into Neutral, then slightly unstowr the switch housing bolts, set the holes in the switch 'on top' the lever, and finally turn the swivel nut and switch bolts tightly. After that, inspect the transaxle operation in each of the shift lever positions It should be possible to hear the starter only when in the Park and Neutral positions. For replacement, unplug the cable from the shift lever and then use a pair of pliers to remove the large C-clips that holds the other end of the cable to the shift bracket. On some models, unscrew the nut and small metal clip that hold the cable in place in relation to the transaxle shift lever and housing bracket, or shove the cable off the cable bracket. Pull out the two shift cable grommet bolts that fix the grommet to the bulkhead; and unbend the shift cable from vehicle assembly. In term of installation, you have to feed the shift cable through the bulkhead opening then retract it in the console area then secure the C-clip into the bracket on the shift lever assembly Or, press the cable into the cable bracket on the transaxle in specific models. Fit the shift cable to the lever of the transaxle range sensor using the C-clip and put the grommet in its place; tighten the bolts. In the console area, tighten the screws of the shift position indicator assembly. Finally, correctly position the shift cable and then install the floor console with shifting the lever to and fro to the appropriate positions.