How to replace the rear Parking Brake Shoe on Hyundai Excel?

To replace the rear brake shoes, start by removing the brake discs and inspecting the shoe lining thickness; replace if worn down to 1/32-inch or less. If desired, remove the hub and bearing assembly, though it's feasible to perform the procedure without this step. Clean brake parts with brake system cleaner. Follow the provided illustrations for step-by-step replacement: remove return springs, retainer plate, spread shoes, take out strut, remove star-wheel mechanism, disconnect shoe hold-down springs and retainers, eliminate lower spring, and detach shoe from parking brake cable. Apply brake lubricant to backing plates and star-wheel threads, then install shoes, springs, and retainer components in the correct order as shown in the illustrations. Tighten the hub nut and stake it to the spindle. Install the brake disc, adjust parking brake shoe clearance by turning adjuster star wheel, then install hole plugs. Proceed to install the brake caliper, wheel, and tighten lug nuts. Set parking brake with around 45 pounds of force and count clicks; it should be six or seven clicks-if not, adjust the parking brake.

Genuine Hyundai Excel Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Shoes found

View related parts
Hyundai Excel Rear Brake Shoe & Lining Kit
Part Number: 58305-23A00
$46.78 MSRP: $65.16
You Save: $18.38 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Shoes
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1990-1994 Hyundai Excel | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door, 5 Door
View related parts
Hyundai Excel Rear Brake Shoe & Lining Kit
Part Number: 58305-24A00
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-24A20
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1990-1994 Hyundai Excel | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door, 5 Door
View related parts
Hyundai Excel Rear Brake Shoe & Lining Kit
Part Number: 58305-21A00
$35.90 MSRP: $47.69
You Save: $11.79 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1985-1989 Hyundai Excel
View related parts
Hyundai Excel Rear Brake Shoe & Lining Kit
Part Number: 58305-21300
$47.66 MSRP: $66.39
You Save: $18.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-21301
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1985-1989 Hyundai Excel
View related parts
Hyundai Excel Rear Brake Shoe & Lining Kit
Part Number: 58305-24A20
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Shoes
- Position: Rear
- Replaces: 58305-24A00
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1990-1994 Hyundai Excel | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door, 5 Door

Hyundai Excel Parking Brake Shoe

Hyundai Excel Parking Brake Shoe is responsible for keeping the car stationary by pushing its friction lining against a drum surface that prevents the rear wheels from turning when you pull the lever or press the pedal. Early Hyundai Excel versions with rear drum brakes applied a very simple cable linkage, which applied the same Parking Brake Shoe for both everyday braking and parking hold. When in later models of the Excel, they switched to rear disc brakes, two updated approaches appeared. One mechanically drives the caliper pistons so a compact Parking Brake Shoe now shaped as pads clamps the rotor, while another tucks a small drum inside the rotor where a dedicated Parking Brake Shoe expands outward for a firm lock. Recent Hyundai Excel trims may incorporate some electronic motors pulling on the cable or rotating caliper screws, but the basic Parking Brake Shoe principle of friction-based restraint never changes. Periodic use of it prevents the seizing of cables and adjusters, protecting every Hyundai against unwanted roll or a slack handle.

If you are looking for affordable high-quality OEM Hyundai Excel Parking Brake Shoe, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Excel Parking Brake Shoe at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Excel Parking Brake Shoe Parts Questions & Experts Answers

Rear Brake Shoe & Lining Kit
58305-23A00
Q: How to replace the rear Parking Brake Shoe on Hyundai Excel?
A:
To replace the rear brake shoes, start by removing the Brake Discs and inspecting the shoe lining thickness; replace if worn down to 1/32-inch or less. If desired, remove the hub and bearing assembly, though it's feasible to perform the procedure without this step. Clean brake parts with brake system cleaner. Follow the provided illustrations for step-by-step replacement: remove return springs, retainer plate, spread shoes, take out strut, remove star-wheel mechanism, disconnect shoe hold-down springs and retainers, eliminate lower spring, and detach shoe from Parking Brake Cable. Apply brake lubricant to backing plates and star-wheel threads, then install shoes, springs, and retainer components in the correct order as shown in the illustrations. Tighten the hub nut and stake it to the spindle. Install the brake disc, adjust parking brake shoe clearance by turning adjuster star wheel, then install hole plugs. Proceed to install the Brake Caliper, wheel, and tighten lug nuts. Set parking brake with around 45 pounds of force and count clicks; it should be six or seven clicks-if not, adjust the parking brake.