How to remove and install a starter solenoid on Hyundai Excel?

Disconnect the negative cable from car battery. Take out the starter motor. Disconnect the big starter motor lead from solenoid terminal. To separate solenoid from starter motor, unscrew nut and remove lead. Unscrew screws securing solenoid to starter motor, then remove them. Take off the solenoid mounting screws and pull the solenoid straight off the starter flange. Take out the solenoid from the body flange of the starter motor. Reverse of removal is installation.

Genuine Hyundai Excel Starter Solenoid

Starter Solenoid Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Starter Solenoids found

View related parts
Hyundai Excel Starter Magnetic Switch Assembly
Part Number: 36120-11130
$286.28 MSRP: $402.21
You Save: $115.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Starter Magnetic
- Replaced by: 36120-21740
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1985-1989 Hyundai Excel
View related parts
Hyundai Excel Starter Magnetic Switch Assembly
Part Number: 36120-32500
$286.28 MSRP: $402.21
You Save: $115.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Starter Magnetic
- Replaced by: 36120-21740
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1985-1989 Hyundai Excel
View related parts
Hyundai Excel Starter Magnetic Switch Assembly
Part Number: 36120-11140
$286.28 MSRP: $402.21
You Save: $115.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Starter Magnetic
- Replaced by: 36120-21740
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1985-1994 Hyundai Excel | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door, 5 Door

Hyundai Excel Starter Solenoid

The Hyundai Excel Starter Solenoid closes the high-current circuit that causes the starter motor to turn the engine, putting the starter pinion into the ring gear when the ignition key is turned. When you turn the ignition on, the Starter Solenoid acts like an electromagnet. It pulls an internal plunger which closes some heavy contacts. These contacts allow battery power to flow to the starter motor. In the starter system of a Hyundai Excel, the electromagnet pulls the pinion forward so that it engages with the flywheel to enable the flow of torque which cranks the engine. When the key is released, power to the Starter Solenoid gets interrupted, the solenoid contacts open, the pinion retracts, and the starter motor stops. The component is also dependent on a one-way clutch so that a running engine cannot drive the motor. If weak battery voltage or corroded cables occur, only a clicking sound will be heard and cranking will not take place. The Starter Solenoid is failing to close contacts on the Hyundai Excel. Consistent operation of the Starter Solenoid in a Hyundai Excel during every start-up is helped by clean connections and a reliable battery condition.

If you are looking for affordable high-quality OEM Hyundai Excel Starter Solenoid, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Excel Starter Solenoid at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Excel Starter Solenoid Parts Questions & Experts Answers

Starter Magnetic Switch Assembly
36120-11140
Q: How to remove and install a starter solenoid on Hyundai Excel?
A:
Disconnect the negative cable from car battery. Take out the Starter Motor. Disconnect the big starter motor lead from solenoid terminal. To separate solenoid from starter motor, unscrew nut and remove lead. Unscrew screws securing solenoid to starter motor, then remove them. Take off the solenoid mounting screws and pull the solenoid straight off the starter flange. Take out the solenoid from the body flange of the starter motor. Reverse of removal is installation.