How to Remove and Replace Hazard Warning Switch and Wiper Switch on Hyundai Elantra?

The dashboard light control unit is installed on the left side of the center instrumental panel molding, near the steering wheel, and contains a rheostat for changing the illumination of the instrumental panel bulbs; if the illumination intensity does not change, the light control switch must be replaced. For models prior to 2000 one could pull out the light control unit by wedging a screwdriver, for 2001- 2006 models the center bezel needs to be unscrewed, then the connector has to be unplugged, and then one can remove the switch. To reach the switch in the 2007 to 2010 models, the switch assembly is unbolted from the instrument panel while in the 2011 and later models, the instrument panel end caps are unscrewed and the driver's side trim panel needs to be removed to gain access to the switch. A tad bit bigger but also more discrete; the hazard switch is marked by a triangle and can only be reached after the removal of the center instrument panel trim bezel. Rear defogger switch of the air control conditioner or is located in the back of the front passenger's instrument panel center bezel in the 2004 and subsequent models, the switch is fixed to the right side and connected to the air conditioner control button, to remove it and replace it, the center bezel must be taken off and dismantled. The rear wiper/washer switch is in the left side of the instrument panel in station wagons, and in 2013 and later GT models its functionality is incorporated into that of the main wiper button; to remove it, the switch head must be teased out and the electrical connector unplugged. Some of the switch pod housing configurations are the Electronic Stability Control Off switch and the rheostat Switch; any fault in any of the switch pod elements means replacement of the entire pod. To reach the switch pod, the negative battery terminal cable needs to be disconnected, the knee bolster needs to be unbolted and the pod and mounting screws needs to come out to separate the pod from the instrument panel, in addition to the electrical connectors needs to be disconnected while engaging the pod, and the re-engagement is done by following the above procedure in reverse order.

Genuine Hyundai Elantra Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Hazard Warning Switches found

View related parts
Hyundai Elantra Switch Assembly-Hazard Warning Lam
Part Number: 93790-2D100-AX
$67.05 MSRP: $94.21
You Save: $27.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning Lamp; Hazard Switch
- Manufacturer Note: INT;OH
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-28000
$54.76 MSRP: $76.27
You Save: $21.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard
- Replaced by: 93790-28001
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-28001
$54.76 MSRP: $76.27
You Save: $21.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard; Hazard Switch
- Replaces: 93790-28000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-2H000-9K
$59.31 MSRP: $83.32
You Save: $24.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard; Hazard Switch
- Manufacturer Note: INT;9K
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-2H000-9P
$59.31 MSRP: $83.32
You Save: $24.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard; Hazard Switch
- Manufacturer Note: INT;9P
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Switch Assembly-Hazard Warning Lam
Part Number: 93790-2D100-CA
$70.88 MSRP: $99.58
You Save: $28.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning Lamp
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Switch Assembly-Hazard Warning Lam
Part Number: 93790-2D300-AX
$70.88 MSRP: $99.58
You Save: $28.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning Lamp; Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-AB000
$38.64 MSRP: $53.82
You Save: $15.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard; Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-28010
$54.76 MSRP: $76.27
You Save: $21.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard; Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra SWITCH ASSY-HAZARD
Part Number: 93790-AA000
$56.12 MSRP: $78.16
You Save: $22.04 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Elantra | DOHC - GDI, DOHC - MPI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-2H000-9Y
$59.31 MSRP: $83.32
You Save: $24.01 (29%)
Product Specifications
- Other Name: Switch Assembly-Hazard; Hazard Switch
- Manufacturer Note: INT;9Y
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-29000
Product Specifications
- Other Name: Switch Assembly-Hazard; Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5
View related parts
Hyundai Elantra Hazard Switch Assembly
Part Number: 93790-29550
Product Specifications
- Other Name: Switch Assembly-Hazard; Cruise Switch, Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5
View related parts
Hyundai Elantra Switch Assembly-Hazard Warning Lam
Part Number: 93790-2D300-CA
Product Specifications
- Other Name: Switch Assembly-Hazard Warning Lamp
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | Middle Grade | 4 Door Sedan, 5 Door Sedan

Hyundai Elantra Hazard Warning Switch

The Hyundai Elantra Hazard Warning Switch allows drivers to immediately signal trouble by getting all the turn signal lamps to flash simultaneously. Pressing this dashboard button makes the connection to the flasher circuit, and the Hazard Warning Switch pulses current to all corner indicators so they will blink in unison, a sight other motorists quickly recognize as a cautionary alert that the car is slowed, stopped, or facing danger. Throughout the years, the Hazard Warning Switch has maintained the same simple objective, but its appearance has changed as it has gone from a simple rectangle to the now familiar red triangle icon, always placed within easy reach so that reaction time remains short. An illuminated bezel around the Hazard Warning Switch also guides the driver at night. Regardless of trim or model year, the switch is separate from the stalk-mounted turn controls, which avoids confusion in stressful moments on the road. Because the feature activates both left and right signal bulbs at the same time, it creates twice the visual footprint of a single blinker, dramatically raising the likelihood that surrounding traffic will respond accordingly. Every Hyundai driver enjoys this reliable protection, and every Elantra owner can count on the intuitive feel of the dedicated Hazard Warning Switch in seconds when it counts. The Elantra's reputation for practical safety is due in large part to this small but decisive device built into the very core of Hyundai design.

If you are looking for affordable high-quality OEM Hyundai Elantra Hazard Warning Switch, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Elantra Hazard Warning Switch at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Elantra Hazard Warning Switch Parts Questions & Experts Answers

Switch Assembly-Hazard Warning Lam
93790-2D100-AX
Q: How to Remove and Replace Hazard Warning Switch and Wiper Switch on Hyundai Elantra?
A:
The dashboard light control unit is installed on the left side of the center instrumental panel molding, near the steering wheel, and contains a rheostat for changing the illumination of the instrumental panel bulbs; if the illumination intensity does not change, the light control switch must be replaced. For models prior to 2000 one could pull out the light control unit by wedging a screwdriver, for 2001- 2006 models the center bezel needs to be unscrewed, then the connector has to be unplugged, and then one can remove the switch. To reach the switch in the 2007 to 2010 models, the switch assembly is unbolted from the instrument panel while in the 2011 and later models, the instrument panel end caps are unscrewed and the driver's side trim panel needs to be removed to gain access to the switch. A tad bit bigger but also more discrete; the hazard switch is marked by a triangle and can only be reached after the removal of the center instrument panel trim bezel. Rear defogger switch of the air control conditioner or is located in the back of the front passenger's instrument panel center bezel in the 2004 and subsequent models, the switch is fixed to the right side and connected to the air conditioner control button, to remove it and replace it, the center bezel must be taken off and dismantled. The rear wiper/washer switch is in the left side of the instrument panel in station wagons, and in 2013 and later GT models its functionality is incorporated into that of the main wiper button; to remove it, the switch head must be teased out and the electrical connector unplugged. Some of the switch pod housing configurations are the Electronic Stability Control Off switch and the rheostat Switch; any fault in any of the switch pod elements means replacement of the entire pod. To reach the switch pod, the negative battery terminal cable needs to be disconnected, the knee bolster needs to be unbolted and the pod and mounting screws needs to come out to separate the pod from the instrument panel, in addition to the electrical connectors needs to be disconnected while engaging the pod, and the re-engagement is done by following the above procedure in reverse order.