How to check and replace the Mass Air Flow Sensor on Hyundai Elantra?

The checking procedure is applicable only to 2006 and earlier models, while 2007 through 2010 models require special equipment and procedures. The MAF sensor is situated in the intake duct between the air cleaner housing and the throttle body; to remove it, loosen the hose clamp screws. Without disconnecting the MAF sensor electrical connector, backprobe terminal 1 of the MAF sensor side of the connector with a suitable probe and connect a voltmeter. Check the output voltage at idle and then at 3,000 rpm, comparing your measurement with the specified voltage values. If the MAF sensor output voltage varies significantly from these values, it should be replaced. To replace the sensor, unplug the electrical connector by depressing the wire retainer and pulling it out, then loosen the hose clamps and remove the MAF from the intake duct. Installation follows the reverse order of removal.

Genuine Hyundai Elantra Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Mass Air Flow Sensors found

View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-23700
$378.16 MSRP: $535.97
You Save: $157.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-2E000
$187.82 MSRP: $263.89
You Save: $76.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2019-2020 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-23720
$359.12 MSRP: $508.98
You Save: $149.86 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-23010
$446.52 MSRP: $632.85
You Save: $186.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 28164-23200
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-32540
$731.74 MSRP: $1046.31
You Save: $314.57 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Replaces: 28164-32510
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-33400
$731.74 MSRP: $1046.31
You Save: $314.57 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-2J600
$153.94 MSRP: $216.27
You Save: $62.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-03200
$177.68 MSRP: $249.63
You Save: $71.95 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Elantra | DOHC - GDI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Sensor Assembly-Air Flow
Part Number: 28164-23200
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Replaces: 28164-23010
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5

Hyundai Elantra Mass Air Flow Sensor

If you are looking for affordable high-quality OEM Hyundai Elantra Mass Air Flow Sensor, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Elantra Mass Air Flow Sensor at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Elantra Mass Air Flow Sensor Parts Questions & Experts Answers

Sensor Assembly-Air Flow
28164-23700
Q: How to check and replace the Mass Air Flow Sensor on Hyundai Elantra?
A:
The checking procedure is applicable only to 2006 and earlier models, while 2007 through 2010 models require special equipment and procedures. The MAF sensor is situated in the intake duct between the air cleaner housing and the throttle body; to remove it, loosen the hose clamp screws. Without disconnecting the MAF sensor electrical connector, backprobe terminal 1 of the MAF sensor side of the connector with a suitable probe and connect a voltmeter. Check the output voltage at idle and then at 3,000 rpm, comparing your measurement with the specified voltage values. If the MAF sensor output voltage varies significantly from these values, it should be replaced. To replace the sensor, unplug the electrical connector by depressing the wire retainer and pulling it out, then loosen the hose clamps and remove the MAF from the intake duct. Installation follows the reverse order of removal.