How to replace the trunk latch and trunk lock cylinder on Hyundai Elantra?

To replace the trunk lid latch, open the trunk and pull the composite fasteners and the trim panel on 2007 and later models. It also provides an area for installation around the trunk lid latch assembly by scratching a line around it. Remove the cable or rod from the latch, then put a mark in the body where the latch was previously positioned and, thereafter, undo the two screws on the latch so that you can easily detach the latch. Then remove the wiring harness or cable from the latch and the process of installing the part would be to reverse that of the removal. For the trunk lock cylinder you have to take out trunk lid trim panel for 2007 and later models and later disconnect the rod from the lock cylinder. On the cars up to 2006 models, you need to take out the lock's retaining clip; in cars made after that year, you have to unscrew the mounting screw. Last of all, get the lock cylinder out of the trunk lid, and installation will also be the same process of removal.

Genuine Hyundai Elantra Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Trunk Lock Cylinders found

View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81250-2HA00
$86.62 MSRP: $121.69
You Save: $35.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Cylinder & Keys
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81250-2HA10
$86.62 MSRP: $121.69
You Save: $35.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81251-2DF00
$131.37 MSRP: $184.56
You Save: $53.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade | 4 Door Sedan
View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81250-3XA00
$131.17 MSRP: $184.29
You Save: $53.12 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2013 Hyundai Elantra | DOHC - GDI, DOHC - MPI | Coupe - 2Door 5P
View related parts
Hyundai Elantra Lock Assembly-Tail Gate
Part Number: 81250-29B00
$80.14 MSRP: $112.60
You Save: $32.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 5 Door Wagon 5
View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81250-29A00
$104.10 MSRP: $146.26
You Save: $42.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid
- Replaced by: 81250-29A11
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5
View related parts
Hyundai Elantra Lock Assembly-Tail Gate
Part Number: 81251-2DA20
$107.68 MSRP: $151.29
You Save: $43.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan
View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81250-28A00
$67.86 MSRP: $95.34
You Save: $27.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81250-29A11
$104.10 MSRP: $146.26
You Save: $42.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Cylinder & Keys, Lock Cylinder
- Replaces: 81250-29A00
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5
View related parts
Hyundai Elantra Trunk Lid Lock Assembly
Part Number: 81251-2DA00
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan, 5 Door Sedan

Hyundai Elantra Trunk Lock Cylinder

Hyundai Elantra Trunk Lock Cylinder is a device that secures the back area of the car by allowing the owners to lock the lid to ensure that the items they put in there are not stolen. The simple device is placed in the slot of the trunk key, and when you turn the key, the Trunk Lock Cylinder rotates a small bar that clips the latch, preventing any person without the proper key from opening the deck lid. Since the average trunk usually carries tools, a spare tire, fishing tackle, or building materials, a good Trunk Lock Cylinder means that the contents will not be easily snatched as the car is parked. The basic Trunk Lock Cylinder design has remained mechanical in many Hyundai sedans, including successive generations of the Elantra, without the use of delicate electronics, and thus there are no actual style variations that could be followed, other than slight size adjustments to fit various body shells. Maintaining the part clean and lightly oiled allows the Trunk Lock Cylinder to rotate easily over the years without losing the simple security that the owners of Hyundai and the Elantra have come to expect.

If you are looking for affordable high-quality OEM Hyundai Elantra Trunk Lock Cylinder, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Elantra Trunk Lock Cylinder at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Elantra Trunk Lock Cylinder Parts Questions & Experts Answers

Trunk Lid Lock Assembly
81250-2HA00
Q: How to replace the trunk latch and trunk lock cylinder on Hyundai Elantra?
A:
To replace the trunk lid latch, open the trunk and pull the composite fasteners and the trim panel on 2007 and later models. It also provides an area for installation around the trunk lid latch assembly by scratching a line around it. Remove the cable or rod from the latch, then put a mark in the body where the latch was previously positioned and, thereafter, undo the two screws on the latch so that you can easily detach the latch. Then remove the wiring harness or cable from the latch and the process of installing the part would be to reverse that of the removal. For the trunk lock cylinder you have to take out trunk lid trim panel for 2007 and later models and later disconnect the rod from the lock cylinder. On the cars up to 2006 models, you need to take out the lock's retaining clip; in cars made after that year, you have to unscrew the mounting screw. Last of all, get the lock cylinder out of the trunk lid, and installation will also be the same process of removal.