My Garage
Cart

Genuine Hyundai Santa Fe Coolant Pipe Seal

Engine Coolant Pipe Seal
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coolant Pipe Seals found

  • Diagram for Hyundai Santa Fe Coolant Pipe Seal - 25462-21010
    View related parts

    Hyundai Santa Fe Ring O

    Part Number: 25462-21010
    $1.15 MSRP: $1.48
    You Save: $0.33 (23%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: O-Ring
    • Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
    Fits the following Vehicles:
    • 2019-2020 Hyundai Santa Fe | DOHC - GDI, DOHC - TCI/GDI | Wagon - 5Door 5P
    • 2000-2012 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, 5 Door Wagon 7, Wagon - 5Door 5P, Wagon - 5Door 7P
  • Diagram for Hyundai Santa Fe Coolant Pipe Seal - 25462-35504
    View related parts

    Hyundai Santa Fe Engine Coolant Pipe O-Ring

    Part Number: 25462-35504
    $3.67 MSRP: $4.74
    You Save: $1.07 (23%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Water Inlet Pipe O-Ring, Thermostat Housing O-Ring; O-Ring
    • Replaces: 25462-35500
    • Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
    Fits the following Vehicles:
    • 2000-2018 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - GDI, DOHC - MPI | 5 Door Wagon, 5 Door Wagon 7, Wagon - 5Door 5P, Wagon - 5Door 7P, Wagon - Long 5Door 6P, Wagon - Long 5Door 7P
  • Diagram for Hyundai Santa Fe Coolant Pipe Seal - 25462-35500
    View related parts

    Hyundai Santa Fe Ring O

    Part Number: 25462-35500
    $3.67 MSRP: $4.74
    You Save: $1.07 (23%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: O-Ring
    • Replaced by: 25462-35504
    • Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
    Fits the following Vehicles:
    • 2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon, 5 Door Wagon 7
  • Hyundai Santa Fe Coolant Pipe Seal - 25462-2S000
    Diagram for Hyundai Santa Fe Coolant Pipe Seal - 25462-2S000
    View related parts

    Hyundai Santa Fe Ring O

    Part Number: 25462-2S000
    $1.40 MSRP: $1.81
    You Save: $0.41 (23%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: O-Ring; Water Inlet Pipe, Water Inlet Pipe Gasket
    • Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
    Fits the following Vehicles:
    • 2021-2023 Hyundai Santa Fe | DOHC - GDI, DOHC - TCI/GDI | Wagon - 5Door 5P

Hyundai Santa Fe Coolant Pipe Seal

The Hyundai Santa Fe Coolant Pipe Seal securely retains coolant inside the moving joint where the pipe meets the hose, helping to keep the vehicle cool during operation. For years, the Coolant Pipe Seal received accolades as it became an integral part of every Hyundai powertrain. It depends on the fact that the seal can flex along with the motor. Yet it can grip tough when the clamp gets tight. That prevents even the slight drips that could spike engine temperature in a Hyundai Santa Fe. The Coolant Pipe Seal suits multiple Santa Fe generations and trims, from the nimble SE to the luxurious Calligraphy. Thus, owners swap it in with peace of mind since the same molded elastomer ring was designed for the same channel size. By dampening vibration and ensuring stable pressure, each Coolant Pipe Seal protects the aluminum block, radiator, and heater core from the expensive damage caused by steam pockets. The component also enhances efficiency, as a sealed system allows pumps to circulate at the correct rate, so the Santa Fe can attain its noted fuel savings and meet Hyundai's efficiency standards during commutes or family road trips. It enhances safety as well; a burst hose would spray hot fluid near belts and electronics. Moreover, a new Coolant Pipe Seal prevents that hazard for every Santa Fe on the highway. Routine visual inspections are easy to conduct, and following prescribed Hyundai mileage schedules for hose replacement maintains the performance of the final Coolant Pipe Seal at factory settings without any special tooling. Drivers value the negligible weight of the Coolant Pipe Seal, especially since it can withstand high heat, cold starts, and chemical additives. Having these qualities helps keep this Hyundai midsize SUV traveling on the highway and not on the shoulder. The reason why the Santa Fe Coolant Pipe Seal is well-known among daily road users is because of its balanced design.

If you are looking for affordable high-quality OEM Hyundai Santa Fe Coolant Pipe Seal, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Santa Fe Coolant Pipe Seal at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Related Hyundai Santa Fe Parts