How to disconnect and remove the MAP sensor on Hyundai Santa Fe?

Finally, the MAP sensor of 2007 and later models is situated at the rear of the engine, and it is connected to the upper intake manifold via a vacuum hose Te disturbances of the vacuum hose feed back to the MAP sensor and alter the input of the ECM; models 2001 through 2006 do not have this sensor. First, remove the cable of one of the battery terminals, particularly, the negative terminal. Following this, unscrew the vacuum hose from a sensor, then the mounting screws as you pull the sensor of. When installing, do it the reverse of how it was removed.

Genuine Hyundai Santa Fe MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 MAP Sensors found

View related parts
Hyundai Santa Fe Sensor Assembly-Map
Part Number: 39300-2B000
$139.00 MSRP: $195.29
You Save: $56.29 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2009-2020 Hyundai Santa Fe | DOHC - GDI, DOHC - MPI | Wagon - 5Door 5P, Wagon - Long 5Door 6P, Wagon - Long 5Door 7P
View related parts
Hyundai Santa Fe Sensor Assembly-Map
Part Number: 39300-38200
$141.93 MSRP: $199.40
You Save: $57.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 39300-38100
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2009 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, 5 Door Wagon 7, Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Hyundai Santa Fe Sensor Assembly-Map
Part Number: 39300-3C500
$198.37 MSRP: $278.71
You Save: $80.34 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2009-2012 Hyundai Santa Fe | DOHC - MPI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Sensor Assembly-Map
Part Number: 39300-2M417
$59.94 MSRP: $84.21
You Save: $24.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Santa Fe | DOHC - TCI/GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Sensor Assembly-Map
Part Number: 39300-38100
$141.93 MSRP: $199.40
You Save: $57.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 39300-38200
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon
View related parts
Hyundai Santa Fe Sensor Assembly-Map
Part Number: 39300-2S000
$123.96 MSRP: $174.16
You Save: $50.20 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Santa Fe | DOHC - GDI | Wagon - 5Door 5P

Hyundai Santa Fe MAP Sensor

If you are looking for affordable high-quality OEM Hyundai Santa Fe MAP Sensor, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Santa Fe MAP Sensor at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Santa Fe MAP Sensor Parts Questions & Experts Answers

Sensor Assembly-Map
39300-2B000
Q: How to disconnect and remove the MAP sensor on Hyundai Santa Fe?
A:
Finally, the MAP sensor of 2007 and later models is situated at the rear of the engine, and it is connected to the upper intake manifold via a vacuum hose Te disturbances of the vacuum hose feed back to the MAP sensor and alter the input of the ECM; models 2001 through 2006 do not have this sensor. First, remove the cable of one of the battery terminals, particularly, the negative terminal. Following this, unscrew the vacuum hose from a sensor, then the mounting screws as you pull the sensor of. When installing, do it the reverse of how it was removed.