How to remove and install shift cables in a Hyundai Santa Fe?

First, engage the parking brake and make sure that the gear shift is in the neutral position; now, detach the knob of the gear shift lever by using an Allen wrench. Finally, to gain access to the area in which the moisture has collected, it is necessary to unbolt and pull out a center console assembly. Remove the remaining pins from the ends of the shift cables by using pliers and then, remove the retaining clips from the cable housing-they are located in the shifter's base. The next procedure is where you have to look for shift cables at the transaxle then you have to remove the retaining clips of shift cables and after that withdraw the pins from the transaxle ends of the shift cables. Pull the cables out through the firewall grommet for the removal. Before replacing the cables it is recommended to ensure that the end bushings are tight and free from any signs of damage. Last, before that, the installation process is completed in the opposite order of the removal process.

Genuine Hyundai Santa Fe Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Shift Cables found

View related parts
Hyundai Santa Fe Automatic Transmission Cable Assembly
Part Number: 46790-0W200
$109.11 MSRP: $153.29
You Save: $44.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2009-2012 Hyundai Santa Fe | DOHC - MPI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Automatic Transmission Lever Cable Assembly
Part Number: 46790-2B100
$104.38 MSRP: $146.65
You Save: $42.27 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Replaced by: 46790-0W100
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2009 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, 5 Door Wagon 7, Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Hyundai Santa Fe Manual Transmission Lever Cable Assembly
Part Number: 43794-26100
$151.93 MSRP: $213.45
You Save: $61.52 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Manual Transaxle Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon
View related parts
Hyundai Santa Fe Automatic Transmission Lever Cable Assembly
Part Number: 46790-2B000
$96.08 MSRP: $134.98
You Save: $38.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon, 5 Door Wagon 7
View related parts
Hyundai Santa Fe Automatic Transmission Lever Cable Assembly
Part Number: 46790-S2300
$99.21 MSRP: $139.39
You Save: $40.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy-Atm Lever; Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2019-2020 Hyundai Santa Fe | DOHC - TCI/GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Automatic Transmission Lever Cable Assembly
Part Number: 46790-S2200
$104.15 MSRP: $146.32
You Save: $42.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy-Atm Lever; Cable, Shift Control Cable
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2019-2020 Hyundai Santa Fe | DOHC - GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Automatic Transmission Lever Cable Assembly
Part Number: 46790-0W100
$104.38 MSRP: $146.65
You Save: $42.27 (29%)
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Lever
- Replaces: 46790-2B100
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2009 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, 5 Door Wagon 7, Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Hyundai Santa Fe Manual Transmission Lever Cable Assembly
Part Number: 43794-2B200
Product Specifications
- Other Name: Cable Assembly-Manual Transaxle Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2009 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, 5 Door Wagon 7, Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Hyundai Santa Fe Manual Transmission Lever Cable Assembly
Part Number: 43794-1U100
Product Specifications
- Other Name: Cable Assembly-Manual Transmission Lever
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2009-2012 Hyundai Santa Fe | DOHC - MPI | Wagon - 5Door 5P

Hyundai Santa Fe Shift Cable

If you are looking for affordable high-quality OEM Hyundai Santa Fe Shift Cable, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Santa Fe Shift Cable at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Santa Fe Shift Cable Parts Questions & Experts Answers

Automatic Transmission Lever Cable Assembly
46790-0W100
Q: How to remove and install shift cables in a Hyundai Santa Fe?
A:
First, engage the parking brake and make sure that the gear shift is in the neutral position; now, detach the knob of the gear shift lever by using an Allen wrench. Finally, to gain access to the area in which the moisture has collected, it is necessary to unbolt and pull out a center console assembly. Remove the remaining pins from the ends of the shift cables by using pliers and then, remove the retaining clips from the cable housing-they are located in the shifter's base. The next procedure is where you have to look for shift cables at the transaxle then you have to remove the retaining clips of shift cables and after that withdraw the pins from the transaxle ends of the shift cables. Pull the cables out through the firewall grommet for the removal. Before replacing the cables it is recommended to ensure that the end bushings are tight and free from any signs of damage. Last, before that, the installation process is completed in the opposite order of the removal process.