Is it advisable to leave the pressing of the wheel hub and bearing from the steering knuckle to a professional mechanic on Hyundai Elantra?

Due to the special tools and expertise required to press the hub and bearing from the steering knuckle, this job should be left to a professional mechanic. However, the steering knuckle and hub may be removed and the assembly taken to a dealer service department or other qualified repair shop. On 2017 later models, the hub assembly is bolted to the back of the steering knuckle. Remove the driveaxle, then remove the hub and bearing assembly mounting bolts and detach the hub from the knuckle.

How to handle the removal and installation of the rear Wheel Hub on Hyundai Santa Fe?

Loosen the rear wheel lug nuts and, for 4WD models, the drive axle/hub nut. Raise the vehicle and support it securely on jack stands. For 2006 and earlier 2WD models, remove the cap, nut, and washer from the rear hub, using a hammer and punch to unstake the nut, then remove the brake disc. Next, take off the spindle nut and lift off the hub assembly, ensuring to restake the hub nut during installation, as the rear hub assembly is secured with a staked nut that must be restaked into the notch in the spindle after tightening to the specified torque. For 2006 and earlier 4WD models, remove the brake disc and the entire parking brake assembly, disconnect the rear wheel speed sensor wiring harness, and remove the four nuts from the end of the rear bearing housing using holes in the flange. Attach a large two-jaw puller to the rear hub to pull the hub assembly from the bearing housing, then remove the brake backing plate. The bearing housing can be unbolted from the trailing arm, and the snap-ring from the wheel bearing can be removed with snap-ring or needle-nose pliers. The wheel bearing race can be removed by a shop equipped with a press, and installation follows the reverse of removal, tightening all fasteners to the specified torque values. For 2007 and later models, remove the drive axle/hub nut, the rear brake disc, and the wheel speed sensor. From the back side of the knuckle, remove the hub-to-knuckle bolts and separate the hub and bearing assembly from the knuckle. If the drive axle sticks in the hub, use a two-jaw puller to push it out as the hub and bearing are removed. Clean the hub mating surface on the knuckle, then install the hub and bearing assembly, tightening the bolts to the specified torque. The remainder of installation follows the reverse of removal.

Is it advisable to leave the pressing of the wheel hub and bearing from the steering knuckle to a professional shop on Hyundai Sonata?

The process of pressing the hub and bearing onto the steering knuckle calls for special tools and skills; this job can, therefore, only be done by an expert. Nevertheless, the steering knuckle and hub might be removed; the assembly can be brought to a dealer service section or to some other qualified repair garage for additional help regarding the removal process.

Genuine Hyundai Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

195 Wheel Hubs found

View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-C1000
$440.31 MSRP: $624.06
You Save: $183.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Front Hub & Bearing, Hub, Hub Assembly
- Position: Front
Fits the following Hyundai Models:
- Nexo | 2019-2023 | Electric
- Sonata | 2015-2019 | DOHC - GDI, DOHC - TCI/GDI
- Sonata Hybrid | 2016-2019 | DOHC - GDI
- Tucson | 2015-2021 | DOHC - GDI, DOHC - TCI/GDI
- Veloster N | 2019-2022 | DOHC - TCI/GDI
View More
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-F2000
$391.51 MSRP: $554.89
You Save: $163.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel
- Position: Front
Fits the following Hyundai Models:
- Elantra | 2016-2020 | DOHC - MPI, DOHC - TCI/GDI
- Ioniq | 2017-2022 | DOHC - GDI, Electric
- Kona | 2018-2023 | DOHC - MPI, DOHC - TCI/GDI
View More
View related parts
Hyundai Rear Wheel Hub And Bearing Assembly
Part Number: 52730-C1100
$331.16 MSRP: $465.27
You Save: $134.11 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly-Rear
- Position: Rear
Fits the following Hyundai Models:
- Sonata | 2015-2019 | DOHC - GDI, DOHC - TCI/GDI
- Sonata Hybrid | 2016-2019 | DOHC - GDI
- Tucson | 2015-2021 | DOHC - GDI, DOHC - TCI/GDI
- Veloster N | 2019-2022 | DOHC - TCI/GDI
View More
View related parts
Hyundai Wheel Hub Assembly
Part Number: 51750-3J000
$519.45 MSRP: $736.23
You Save: $216.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly; Front Hub, Front Hub & Bearing, Hub, Rear Hub
Fits the following Hyundai Models:
- Santa Fe | 2007-2015 | DOHC - GDI, DOHC - MPI
- Santa Fe Sport | 2013-2015 | DOHC - GDI, DOHC - TCI/GDI
- Veracruz | 2006-2012 | DOHC - MPI
View More
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-1J000
$146.68 MSRP: $206.08
You Save: $59.40 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Hub
- Position: Front
Fits the following Hyundai Models:
- Accent | 2011-2017 | DOHC - GDI
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-C5000
$226.84 MSRP: $318.71
You Save: $91.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub & Bearing, Hub Assembly
- Position: Front
Fits the following Hyundai Models:
- Santa Fe | 2013-2018 | DOHC - GDI
- Santa Fe Sport | 2013-2018 | DOHC - GDI, DOHC - TCI/GDI
- Santa Fe XL | 2019 | DOHC - GDI
View More
View related parts
Hyundai Rear Wheel Hub And Bearing Assembly
Part Number: 52730-F2000
$726.96 MSRP: $1039.47
You Save: $312.51 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly-Rear; Hub & Bearing Assembly, Hub Assembly
- Position: Rear
Fits the following Hyundai Models:
- Elantra | 2016-2020 | DOHC - MPI, DOHC - TCI/GDI
- Kona | 2018-2023 | DOHC - MPI, DOHC - TCI/GDI
View related parts
Hyundai Wheel Hub Assembly
Part Number: 51750-S1000
$452.97 MSRP: $642.00
You Save: $189.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub&Bearing, Rear Hub, Rear Hub & Bearing; Hub Assembly
- Position: Front
Fits the following Hyundai Models:
- Palisade | 2020-2023 | DOHC - GDI
- Santa Cruz | 2022-2023 | DOHC - GDI, DOHC - TCI/GDI
- Santa Fe | 2019-2023 | DOHC - GDI, DOHC - TCI/GDI
- Santa Fe Hybrid | 2021-2023 | DOHC - TCI/GDI
View More
View related parts
Hyundai Rear Wheel Hub Assembly
Part Number: 52750-2B100
$295.74 MSRP: $415.50
You Save: $119.76 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Hub, Hub Assembly, Rear Hub
- Position: Rear
Fits the following Hyundai Models:
- Santa Fe | 2006-2018 | High Grade, Middle Grade | DOHC - GDI, DOHC - MPI
- Santa Fe Sport | 2013-2018 | DOHC - GDI, DOHC - TCI/GDI
- Santa Fe XL | 2019 | DOHC - GDI
- Veracruz | 2006-2012 | DOHC - MPI
View More
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-1P000
$132.48 MSRP: $186.13
You Save: $53.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Hub
- Position: Front
- Replaces: 51750-3Y000
Fits the following Hyundai Models:
- Elantra | 2011-2015 | DOHC - GDI, DOHC - MPI
- Veloster | 2011-2014 | DOHC - GDI
View related parts
Hyundai Rear Wheel Hub And Bearing Assembly
Part Number: 52730-D3000
$380.54 MSRP: $539.34
You Save: $158.80 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly-Rear; Hub & Bearing Assembly, Hub Assembly
- Position: Rear
Fits the following Hyundai Models:
- Tucson | 2015-2021 | DOHC - GDI, DOHC - TCI/GDI
View related parts
Hyundai Rear Wheel Hub And Bearing Assembly
Part Number: 52730-G2000
$611.14 MSRP: $866.18
You Save: $255.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly-Rear
- Position: Rear
Fits the following Hyundai Models:
- Elantra | 2016-2020 | DOHC - MPI, DOHC - TCI/GDI
- Ioniq | 2017-2022 | DOHC - GDI
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-J9000
$440.31 MSRP: $624.06
You Save: $183.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Hub Assembly
- Position: Front
Fits the following Hyundai Models:
- Kona | 2018-2023 | DOHC - MPI, DOHC - TCI/GDI
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-25001
$127.74 MSRP: $179.47
You Save: $51.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Hub, Hub Assembly
- Position: Front
- Replaces: 51750-25000
Fits the following Hyundai Models:
- Accent | 1999-2011 | High Grade, Low Grade, Middle Grade | DOHC - MPI
View related parts
Hyundai Rear Wheel Hub And Bearing Assembly
Part Number: 52730-3S200
$378.86 MSRP: $536.97
You Save: $158.11 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly-Rear
- Position: Rear
Fits the following Hyundai Models:
- Azera | 2011-2016 | DOHC - GDI
- Sonata | 2009-2014 | DOHC - GDI, DOHC - TCI/GDI
- Sonata Hybrid | 2011-2015 | DOHC - MPI
- Tucson | 2009-2014 | DOHC - GDI, DOHC - MPI
View More
View related parts
Hyundai Rear Wheel Hub Assembly
Part Number: 52750-0U000
$348.21 MSRP: $493.52
You Save: $145.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Hub & Bearing, Hub & Bearing Assembly
- Position: Rear
Fits the following Hyundai Models:
- Accent | 2011-2017 | DOHC - GDI
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51730-L1000
$440.31 MSRP: $624.06
You Save: $183.75 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-FR Wheel; Front Hub & Bearing, Hub Assembly
- Position: Front
Fits the following Hyundai Models:
- Kona N | 2022-2023 | DOHC - TCI/GDI
- Sonata | 2020-2023 | DOHC - GDI, DOHC - TCI/GDI
- Sonata Hybrid | 2020-2023 | DOHC - GDI
- Tucson | 2022-2023 | DOHC - GDI, DOHC - TCI/GDI
- Veloster N | 2019-2022 | DOHC - TCI/GDI
View More
View related parts
Hyundai Rear Wheel Hub And Bearing Assembly
Part Number: 52730-L1000
$496.49 MSRP: $703.68
You Save: $207.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy-RR; Hub Assembly, Rear Hub Bearings
- Position: Rear
Fits the following Hyundai Models:
- Elantra N | 2022-2023 | DOHC - TCI/GDI
- Kona N | 2022-2023 | DOHC - TCI/GDI
- Sonata | 2020-2023 | DOHC - GDI, DOHC - TCI/GDI
- Sonata Hybrid | 2020-2023 | DOHC - GDI
View More
View related parts
Hyundai Front Wheel Hub Assembly
Part Number: 51750-39603
$168.33 MSRP: $236.50
You Save: $68.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Hub Assembly
- Position: Front
- Replaces: 51750-39600, 51750-3K100
Fits the following Hyundai Models:
- Sonata | 2005-2014 | High Grade, Middle Grade | DOHC - GDI, DOHC - MPI, DOHC - TCI/GDI
- Sonata Hybrid | 2011-2015 | DOHC - MPI
- Tucson | 2009-2017 | DOHC - GDI, DOHC - MPI, Electric
- XG300 | 2000-2001 | High Grade
- XG350 | 2002-2005 | High Grade
View More
View related parts
Hyundai Rear Wheel Hub And Bearing Assembly
Part Number: 52730-2H000
$433.96 MSRP: $615.06
You Save: $181.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly-Rear; Hub & Bearing, Hub & Bearing Assembly
- Position: Rear
- Replaces: 52730-2H100
Fits the following Hyundai Models:
- Elantra | 2006-2010 | High Grade, Middle Grade | DOHC - MPI
- Elantra Touring | 2008-2012 | DOHC - MPI

| Page 1 of 10 |Next >

1-20 of 195 Results

Hyundai Wheel Hub Parts Questions & Experts Answers

Front Wheel Hub Assembly
51750-F2000
Q: Is it advisable to leave the pressing of the wheel hub and bearing from the steering knuckle to a professional mechanic on Hyundai Elantra?
A: Due to the special tools and expertise required to press the hub and bearing from the steering knuckle, this job should be left to a professional mechanic. However, the steering knuckle and hub may be removed and the assembly taken to a dealer service department or other qualified repair shop. On 2017 later models, the hub assembly is bolted to the back of the steering knuckle. Remove the driveaxle, then remove the hub and bearing assembly mounting bolts and detach the hub from the knuckle.
Rear Wheel Hub Assembly
52750-2B100
Q: How to handle the removal and installation of the rear Wheel Hub on Hyundai Santa Fe?
A: Loosen the rear wheel lug nuts and, for 4WD models, the drive axle/hub nut. Raise the vehicle and support it securely on jack stands. For 2006 and earlier 2WD models, remove the cap, nut, and washer from the rear hub, using a hammer and punch to unstake the nut, then remove the brake disc. Next, take off the spindle nut and lift off the hub assembly, ensuring to restake the hub nut during installation, as the rear hub assembly is secured with a staked nut that must be restaked into the notch in the spindle after tightening to the specified torque. For 2006 and earlier 4WD models, remove the brake disc and the entire parking brake assembly, disconnect the rear wheel speed sensor wiring harness, and remove the four nuts from the end of the rear bearing housing using holes in the flange. Attach a large two-jaw puller to the rear hub to pull the hub assembly from the bearing housing, then remove the brake backing plate. The bearing housing can be unbolted from the trailing arm, and the snap-ring from the wheel bearing can be removed with snap-ring or needle-nose pliers. The wheel bearing race can be removed by a shop equipped with a press, and installation follows the reverse of removal, tightening all fasteners to the specified torque values. For 2007 and later models, remove the drive axle/hub nut, the rear brake disc, and the wheel speed sensor. From the back side of the knuckle, remove the hub-to-knuckle bolts and separate the hub and bearing assembly from the knuckle. If the drive axle sticks in the hub, use a two-jaw puller to push it out as the hub and bearing are removed. Clean the hub mating surface on the knuckle, then install the hub and bearing assembly, tightening the bolts to the specified torque. The remainder of installation follows the reverse of removal.
Rear Wheel Hub And Bearing Assembly
52730-2G300
Q: Is it advisable to leave the pressing of the wheel hub and bearing from the steering knuckle to a professional shop on Hyundai Sonata?
A: The process of pressing the hub and bearing onto the steering knuckle calls for special tools and skills; this job can, therefore, only be done by an expert. Nevertheless, the steering knuckle and hub might be removed; the assembly can be brought to a dealer service section or to some other qualified repair garage for additional help regarding the removal process.

Related Hyundai Parts

Browse by Model

Accent Wheel Hub Azera Wheel Hub Elantra GT Wheel Hub Elantra N Wheel Hub Elantra Touring Wheel Hub Elantra Wheel Hub Entourage Wheel Hub Equus Wheel Hub Excel Wheel Hub Genesis Coupe Wheel Hub Genesis Electrified G80 Wheel Hub Genesis Electrified GV70 Wheel Hub Genesis G70 Wheel Hub Genesis G80 Wheel Hub Genesis G90 Wheel Hub Genesis GV70 Wheel Hub Genesis GV80 Wheel Hub Genesis Wheel Hub Ioniq 5 Wheel Hub Ioniq 6 Wheel Hub Ioniq Wheel Hub Kona Electric Wheel Hub Kona N Wheel Hub Kona Wheel Hub Nexo Wheel Hub Palisade Wheel Hub Santa Cruz Wheel Hub Santa Fe Hybrid Wheel Hub Santa Fe Sport Wheel Hub Santa Fe Wheel Hub Santa Fe XL Wheel Hub Scoupe Wheel Hub Sonata Hybrid Wheel Hub Sonata Wheel Hub Tiburon Wheel Hub Tucson Wheel Hub Veloster N Wheel Hub Veloster Wheel Hub Venue Wheel Hub Veracruz Wheel Hub XG300 Wheel Hub XG350 Wheel Hub