How to replace the rear parking brake shoe and adjust the parking brake system on Hyundai Elantra?

Models equipped with rear disc brakes utilize either a cable actuator system attached to the caliper for certain years or parking brake shoes for others to activate the parking brake system. Begin by removing the rear brake discs. Inspect the thickness of the lining material on the shoes; if it has worn down to 1/32-inch or less, replacement is necessary. The hub and bearing assembly can be removed, although it is possible to replace the shoes without doing so, albeit with limited working room. Clean the brake parts with brake system cleaner, then remove the lower return spring, lift out the star-wheel adjuster mechanism while noting its orientation, and remove the upper return spring. Release the front hold-down spring and lift off the front shoe, followed by the rear shoe assembly. Clean the backing plate thoroughly and lightly lubricate the contact surfaces with high-temperature grease before fitting the new rear shoe and installing the hold-down retainer. Repeat the process for the front shoe, install its hold-down, and the upper return spring. Clean and lubricate the adjuster, install it in its original orientation, and then install the lower return spring while rotating the adjuster for proper clearance. Reinstall the brake discs and remove the hole plugs to adjust the parking brake shoe clearance by turning the adjuster star wheel until the shoes contact the discs, ensuring no drag when the disc is turned. Install the brake caliper, tightening the bolts securely, then install the wheel and tighten the lug nuts to the specified torque. Finally, set the parking brake with about 45 pounds of force and count the number of clicks; it should be about five clicks, and adjustments should be made if necessary.

Genuine Hyundai Elantra Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Parking Brake Shoes found

View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58350-F3A00
$76.02 MSRP: $106.80
You Save: $30.78 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Brake Shoes, Rear Shoes
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2016-2020 Hyundai Elantra | DOHC - MPI, DOHC - TCI/GDI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58350-F2A00
$58.69 MSRP: $82.46
You Save: $23.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Brake Shoes, Rear Shoes
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2016-2020 Hyundai Elantra | DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Elantra Shoe & Lining Kit-Rear Parking Brake
Part Number: 58305-2HA10
$69.96 MSRP: $98.29
You Save: $28.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoes
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-2HA00
$57.93 MSRP: $81.39
You Save: $23.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Brake Shoes
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2010 Hyundai Elantra | High Grade, Middle Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58350-3XA00
$51.00 MSRP: $71.03
You Save: $20.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-RR Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2013 Hyundai Elantra | DOHC - GDI, DOHC - MPI | Coupe - 2Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-28A60
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-28A70
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-28B00
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-28A70
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-28C00
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-28A70
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-28D00
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-28A70
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-28E00
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-28A70
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-29A00
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Shoes
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2000 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 5 Door Wagon 5
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-2DA10
$45.01 MSRP: $62.69
You Save: $17.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-2DF00
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door Sedan
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-29A10
$50.58 MSRP: $70.45
You Save: $19.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Brake Shoes, Shoes
- Position: Rear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1995-2006 Hyundai Elantra | High Grade, Middle Grade | 4 Door, 4 Door Sedan, 5 Door Wagon 5
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-28A00
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake
- Position: Rear
- Replaced by: 58305-28A70
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door
View related parts
Hyundai Elantra Rear Brake Shoe & Lining Kit
Part Number: 58305-28A70
$50.33 MSRP: $70.10
You Save: $19.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe & Lining Kit-Rear Brake; Shoes
- Position: Rear
- Replaces: 58305-28A60, 58305-28C00, 58305-28B00, 58305-28A00, 58305-28E00, 58305-28D00
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1991-1995 Hyundai Elantra | High Grade, Middle Grade | 4 Door

Hyundai Elantra Parking Brake Shoe

Hyundai Elantra Parking Brake Shoe provides the clamping friction to hold the car in one place whenever the hand lever or the pedal is set. Early models of the Elantra with rear drum brakes use the same Parking Brake Shoe set applied for regular stopping, but cable tension instead of hydraulic pressure pushes the linings against the drum wall. As the series switched to rear disc brakes, Hyundai added two main layouts. Some versions feature a mechanical screw within the caliper squeezing small pads, and others conceal a miniature drum and dedicated Parking Brake Shoe assembly within the rotor hat, both styles still being pulled by steel cables. On recent editions of the Elantra, an electronic motor now pulls those cables or turns little actuators on the calipers so the Parking Brake Shoe can be automatically engaged when Park is selected. Whichever design is fitted, regular activation ensures the adjusters and cables don't rust and stick, ensuring Parking Brake Shoe releases cleanly and every Hyundai is secure on steep streets or for quick drift turns. With these evolutions, Hyundai has reliable hill holding throughout the Elantra family.

If you are looking for affordable high-quality OEM Hyundai Elantra Parking Brake Shoe, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Elantra Parking Brake Shoe at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Elantra Parking Brake Shoe Parts Questions & Experts Answers

Rear Brake Shoe & Lining Kit
58350-F3A00
Q: How to replace the rear parking brake shoe and adjust the parking brake system on Hyundai Elantra?
A:
Models equipped with rear disc brakes utilize either a cable actuator system attached to the caliper for certain years or parking brake shoes for others to activate the parking brake system. Begin by removing the rear Brake Discs. Inspect the thickness of the lining material on the shoes; if it has worn down to 1/32-inch or less, replacement is necessary. The hub and bearing assembly can be removed, although it is possible to replace the shoes without doing so, albeit with limited working room. Clean the brake parts with brake system cleaner, then remove the lower return spring, lift out the star-wheel adjuster mechanism while noting its orientation, and remove the upper return spring. Release the front hold-down spring and lift off the front shoe, followed by the rear shoe assembly. Clean the backing plate thoroughly and lightly lubricate the contact surfaces with high-temperature grease before fitting the new rear shoe and installing the hold-down retainer. Repeat the process for the front shoe, install its hold-down, and the upper return spring. Clean and lubricate the adjuster, install it in its original orientation, and then install the lower return spring while rotating the adjuster for proper clearance. Reinstall the brake discs and remove the hole plugs to adjust the parking brake shoe clearance by turning the adjuster star wheel until the shoes contact the discs, ensuring no drag when the disc is turned. Install the Brake Caliper, tightening the bolts securely, then install the wheel and tighten the lug nuts to the specified torque. Finally, set the parking brake with about 45 pounds of force and count the number of clicks; it should be about five clicks, and adjustments should be made if necessary.